3rd annual Kurt Caselli Foundation Ride Day at Glen Helen Raceway


Bryan Bosch

November 7, 2015 – (Motor Sports Newswire) – Join us for the 3rd annual Kurt Caselli Foundation Ride Day at Glen Helen Raceway on December 4, 2015. Gates will open at 8:00am with a $20.00 donation fee collected from participants. Riding will start at 9:00am and end at 3:00pm. This year, The Kurt Caselli Foundation will have the main track available for open riding as well as the kids track and an off-road loop.

 


151107-fmf-kcf_insta_b.jpg

 


A raffle ticket will be handed to each participant at the gate and the raffle will take place at 11:30am. A silent auction will be held at 1:30pm with all proceeds going to The Kurt Caselli Foundation.

 

NEW for this year is the Caselli Team Challenge where two riders will per up and participant in an 8-lap race. The riders will need to use only one bike and switch off each lap. There can only be one pro rider on each team. The start will take place Lemans style with one boot from each of the starting riders in a pile in front of the start line. Riders will run to their boot first and then back to their bike before taking off on the first lap. An entry fee of $20.00 will be mandatory for all teams that goes toward The Kurt Caselli Foundation. The race is limited to 30 teams with a grand prize and custom-made trophy awarded to the winning pair.

 

On behalf of The Kurt Caselli Foundation, we look forward to greeting you at the ride day.
For More info visit and follow www.kurtcaselli.com and @KC66Foundation

  • 3rd Annual Kurt Caselli Memorial Ride Day
  • Friday, December 4th 2015,
  • Glen Helen Raceway, Devore, CA
  • Gates Open 8:00am
  • $20 Entry Fee
  • All Proceeds Will Benefit the Kurt Caselli Foundation
  • Kids Track
  • Caselli Team Challenge
  • Fun Challenging Off-Road Loop
  • Prizes, Raffle and Silent Auction


fmf-banner.jpg




User Feedback


There are no comments to display.



Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By FMFRacing73
      FMF /  Method Race Wheels Giveaway Contest + Free Drink Tank with $100 Purchase + Free Shipping.


    • By gmoss357
      The 200 club thread has worked really well, but it's hard to find jetting info there. So, when you guys get a chance, either copy and paste the info below or copy over the info from the 200 club thread that you have already inputed. Lets keep this a database of information. Thanks.
      Year: 05
      Model (E,W,XC,M):EXC
      Carb size (38 or 36mm): 38
      Slide: 6.5, stock
      Main jet: 182
      Pilot Jet: 42
      Air screw (turns out): 1.5
      Needle model/Clip position: DCL 3rd
      Altitude where you ride: 800'-2500'
      Reeds - stock
      Pipe/silencer - FMF Gnarly, 07 XC silencer
      Head mod - squish, gap - don't know, it has a Wiesco piston, though, that's all I know.
      Other mods: FMF Gnarly, 9 oz FWW, Dunlop D803 TT, 49 tooth rear sprocket, XC silencer.
      Type of fuel - pump 93
      Where in the powerband do you ride (Lugger - for technical stuff, or wide open - desert / MX): a mix, lug when it's tight and open 'er up when it widens. I generally stay just off the pipe though, riding in the meat of the power.
      Degree of satisfaction: very satisfied.
      And finally: how much spooge 1) none, 2) little, 3) medium, 4) lots - (2)
      Notes: This set up worked well for me all summer. Winter is requiring a change for riding in the 40's. Above 50, this set up works well.
    • By stimps
      Well it's time to stop the opinions and roll out the facts (if that's possible). A dyno date has been booked for the 26th Feb to try to seperate fact from myth. Initial plan is something like below. This is all in the aid of seeing what these things really do. It's not cheap so appreciate any input on how we get the most out of this. Need to source a 19" rear road tire this week and get it all ready. If we don't melt it, it should be fun.
      Test Format.
      1. Dep+Dep Silencer HPI Ignition on Power setting
      2. Dep+Dep Silencer HPI Ignition on torque setting
      3. Dep+Dep Silencer std Ignition
      4. Dep+Dep long Enduro Silencer
      5. Stock 05 pipe and stock silencer (96dB)
      6. Stock 06 pipe and 05 silencer (US type96dB)
      7. Stock 06 and 06 Euro Silencer (94dB)
      8. Stock 06 and PC304 (Once touted as ultimate set-up).
      9. PC Works pipe + PC304 Silencer
      10. FMF Factory Fatty+Powercore 2 Silencer
      11. FMF Factory Fatty+Shorty Silencer
      12. 2C pipe + 2C Silencer
      13. Rinaldi Pipe+Rianldi Silencer(YRRD)
      14. Special Yamaha Works pipe+Dep Silencer
      15. Unknown Cone pipe+Dep Silencer
    • By nitrojoe
      alright i just bought a 2003 ktm 200 mxc two stroke. im very excited about it and really had a ball the first time i took it out. i wanted to do a decent tune up and deep inspection on the bike before i took it out for a big ride so i did that today. i had noticed a bit of spooge around the exhaust port, so thats where i started. after removing the pipe, i discovered that the pipe had taken a hard enough hit to be deformed to the point that the inlet to the chamber doesnt fit properly in the exhaust port anymore. the pipe on it is a fmf gnarly. because of the damage to this pipe ive been looking at buying another chamber for it. ive heard that the factory pipe works really well. im guessing its a mid to top end pipe. the gnarly i know is more designed for low end. the only other pipes ive seen are made by doma and pro circuit. any info on them? what kind of rev range are they designed for? im trying to consider all my options before i get another pipe. hopefully the other aftermarket pipes dont hurt the top end like the fmf does. any info would be much appreciated
    • By Kalashnikov
      So I bought a used low hour KTM 350 SXF for cross country racing. I needed a spark arrestor but I didn't wanna spend the $ on a PMB endcap when for a little more I could get a complete muffler with a removable spark arrestor. I chose the FMF PowerCore4 because it was pretty much the cheapest and I had one on my 09 YZ450F and had no problems with performance or excessive sound. It passed the 96db sound limit at the races. Besides I've purchased many FMF pipes before and I generally like them. So the first race of the season on the new KTM and the bike fails sound at 98db, 96db is the limit (96db is the sound limit at all CA state parks and it's the standard for most racing organizations). The guy doing the sound test suggests a repack but the muffler is literally brand new. Then he suggests contacting FMF for a quiet insert and they'll ship me one for free. I contact FMF explaining my situation and was told the quiet core retails for $39.99 and if I wanted to place an order to contact them. This is where I have a problem. I bought the muffler for trail use, it was designed with trail use in mind (it has a spark arrestor). Why should I have to pay extra for a quiet insert? It's not my fault the muffler fails sound. The PowerCore4 is the only muffler FMF sells that doesn't have a quiet core included with purchase. I've talked to 2 different FMF reps and both said I would have to buy a quiet core. It probably costs FMF $40 to make the muffler and probably less than $8 to make a quiet core. Besides the fact they risk losing a longtime and faithful customer, they can afford to ship me a free quiet core and still have made a healthy profit off my purchase of the muffler. Needless to say I'm waiting for a response and I WILL get a free quiet core, but the more hurdles I have to jump through, the less likely I am to purchase another FMF product.