American Motorcyclist Association announces 2018 professional Supercross and Motocross numbers


Bryan Bosch

2017-AMA-RACING-678.jpg

September 20, 2017 Motor Sports Newswire


PICKERINGTON, OH – September 20, 2017 – (Motor Sports Newswire) –  The American Motorcyclist Association has announced the professional competition numbers for pro-licensed riders competing in Monster Energy AMA Supercross, an FIM World Championship, and the Lucas Oil AMA Pro Motocross Championship for the 2018 season.

All riders use the assigned professional number for competition. In addition, the current champion runs the No. 1 plate instead of an assigned professional number when competing in the class or region in which the No. 1 plate was earned. When competing in a class other than the class where the championship was earned, the rider must use the assigned professional number.

2018 Top 100 and Career Pro Numbers for AMA Supercross and Motocross
* Career Numbers
** New Career Number for 2018
 

1-15.JPG
16-25.JPG

 

About the American Motorcyclist Association

Founded in 1924, the AMA is a not-for-profit member-based association whose mission is to promote the motorcycle lifestyle and protect the future of motorcycling. As the world’s largest motorcycling rights and event sanctioning organization, the AMA advocates for riders’ interests at all levels of government and sanctions thousands of competition and recreational events every year. The AMA also provides money-saving discounts on products and services for its members. Through the AMA Motorcycle Hall of Fame in Pickerington, Ohio, the AMA honors the heroes and heritage of motorcycling. For more information, visit www.americanmotorcyclist.com.

Not a member? Join the AMA today.

Source: American Motorcyclist Association

ama-pr-banner-2015.jpg




User Feedback


There are no comments to display.



Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By Mbagg280
      Well maintained and Vet ridden. Low hours. New chain and sprockets.
    • By jen_92_sm
      Hey guys, 
      I am really needing some good advice here from anybody who has ever owned or rebuilt classic Yamaha 2 strokes (1989 - 1994). I live in South Africa, and bought a little farm thumper while on holiday this past weekend. It was advertised as a DT175 which is a bike that is easy to get parts for down here. It has been cosmetically customized and looks pretty darn cool... and lets face it, all the old classic Yamaha 2T engines look the same at a glance! So I genuinely thought it was a naked DT. The bike had no papers, and was used purely for the farmer to putt around on his farm.
      The only things needing attention was the stator cover which had snapped in half - this was visibly noticeable, and a little leak from a badly resealed gasket (both generally easy and cheap to fix here). The bike was still running and idling fine, started first kick, and I had a little ride around the farm before loading the bike up onto my pickup and heading off, thinking I could fix this thing up nicely in no time for next to nothing, and have what we call down in SA "a nuwe speelgoed" (A new plaything) for the weekends when I am not riding my beloved and reliable DRZ400SM. 
      SO, I get home and decide to contact our local Yamaha branch, out of interest, to find out the history of the bike before I start fiddling (Don't ask me why I did not do this all before I bought the bike - It was a spur of the moment purchase, and was sold to me for dirt cheap!). I send off the VIN and engine number. Comes back, and this little freakin' turd turns out to be a 1989 TDR180!! WHAT. But now I am stuck as we do not really have TDR's down here - and I have never even seen one myself.
      Long story short - What alternative could I use as a stator cover? Do any other old Yamaha 2T model stator covers fit the TDR or share similar engine parts? Ordering from Ebay is so expensive thanks to my country being in junk status due to a junk president. So the shipping costs more than the actual item does, and our customs is a joke too. Yamaha has also advised me that this stator cover has been discontinued.
      I have put up local ads looking for parts, contacted FB 2T groups, and local shops. Nothing for TDR's has come back yet.
      Any advice or sharing of experience is welcome!
    • By thsp485
      My 2017 had ran perfectly until my last track day.  For three visits at same track it was great, I changed the oil to synthetic with new filter.  This week, maybe 1/2 lap at speed once warmed up and it would start sputtering/bogging/cutting out momentarily.  Obviously not as it should be.  The air filter was not dirty and temperatures were the same both weekends.  I was guessing bad gas, which after I filled up realized it was 10% ethanol blend premium.  So today I drain the tank, get good premium (no ethanol) and hoped the bike would run right.  Nope.  Still sputtering upon full throttle as it revs out.   Runs fine at low RPM but that really does not matter.  Seems to have more popping on decal too.  The bike seems like it is running really lean at full-throttle as the rpms rise. I got a new foam air filter and oiled it properly, problem still exists.  Next up is to check my electrical connectors, then maybe looks at the plug.  Anybody got any other ideas?  
    • By Gary Semics

      Hitting your landing target is critical in motocross. It is also better for your health! Not only hitting your landing, but getting there quickly is also important. The two most common techniques regarding jumping are absorbing the take off to stay low and launching the take off to clear an obstacle, to make it to the landing.  
      If you like this riding tip, it's just the tip of the iceberg.  Get all the riding techniques and practice methods that will elevate your riding skills For REAL from our Motocross Techniques/Training DVDs or one of our three Instant Access Video On Demand Subscriptions.
      Here's a stop/slow motion riding video where I point out the important techniques:
      If you'd like more riding tips, be sure to click the "Follow this Bog" button in the upper right of the screen. Then you'll be automatically notified of my new entries.
      Gary
      __________________________________________
      More MX Training Resources
      Gary Semics Motocross Technique DVDs.
      I believe my sponsors have the best products and services in the industry. That's why I've stayed with them for so long and I'm grateful they have stayed with me.
      Alpinestars
      Dunlop
      Fox
      Factory Connection
      Renthal
      Maxima
      Scott
      VP
      Wiseco
      Works Connection
      Black Ops Moto
      SDGSeats
      Ripped Vinyl
    • By Radebell
      My rear brake does not even stop my rear tire from the slight rotation while in neutral, revving the bike. I have replaced the brake fluid with the DOT 4 (suggested Suzuki brake fluid), bleed the line countless times, and still to no avail, absolutely no brake. So I believe the problem lies in the caliper piston? Has anyone ever experienced a bad piston?