• Announcements

    • Bryan Bosch

      2019 Zooks!   07/17/2018

      Suzuki Introduces 2019 Motocross, Dual Sport, Off-Road and Youth Models
Sign in to follow this  
Followers 0

How to Log Pivot Turn with Chris Birch


Bryan Bosch
Sign in to follow this  
Followers 0


User Feedback




Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By Bturner
      I've seen alot or debating about this and been told both ways are better. I was hoping once and for all we can come up with a solid answer as to which is the better way to practice/race and why. I watch alot of races and I see the top guys doing both, but we all know we only get to see 5 min clips of GNCC's online so its hard to make an assumption. In the hare scrambles I've done I 've always noticed the A B riders come flying by standing up and hitting berms all the way down the trail standing up, but is this the way they ride the whole race? Some body help me become a better rider and let me know why I'm doing the right way!!
    • By jermag24
      I bought a 2009 KX450 last December and have about 20 hours of riding on it. I've had a few instances where the front end washed out on me, most seriously about a month ago which resulted in a separated shoulder. The bike came with a Dunlop MX51 (Intermediate terrain) on the rear and a Motoz Terrapactor (Soft Terrain) on the front. Both are like new but I've read mixed reviews on the Motoz tire since it has directional tread.
       
      The first time I was riding trails and wheelied up a long hill with whoops. When I brought the front wheel down it landed on a dry root crossing the trail at an angle and the front end slid out, I safely rolled off.
       
      The second time I was riding the track at VDR and it seemed I couldn't push my speed in tighter turns without the front end wanting to wash out. I stayed up but was pretty wiped from wrestling the bike around those turns.
       
      The last time I was going around a slower turn at Watkins and before I knew it, the front end must have caught a rut or washed out and I high-sided. I landed on my shoulder and separated it. Before I get back to riding I want to figure out what the deal is.
       
      My suspension is sprung and valved correctly for my weight and the clickers are set very close to stock settings. I run both tires at 13psi.
       
      As far as technique, I'm a pretty low-time MX rider but have years of trail riding under my belt. On the track, turning is probably my weakness. I've watched a few Semics videos and know to lean back when braking into the turn, then get my nuts up by the tank and my leg out when turning and accelerating out. I tend to lean forward when accelerating out of turns too. It seems I'm either fishtailing out or having to back off as the front end wants to slide out.
       
      Any suggestions on how I can get my skill/confidence up to ride MX with confidence again? Is it the tire or tire pressure to blame? Having a separated shoulder is NOT fun and I miss the hell out of riding. Thanks!
    • By Matriox HD
      I currently have a 250f and am thinking abou getting a 125 or 250 2 stroke. I don't have a lot of experience and I've never ridden a 2 stroke in my life. Thanks
    • By joey_243
      Just wanted some tips on riding ruts im fine with soft single sided ruts but pact double sided ruts just kill me during races any help please thankyou
    • By ukusa
      I'm a older slow rider looking for some technical riding skills advise , I ride a wr250 and the closest please to ride would be Rower fats.