• Announcements

    • Bryan Bosch

      Buy/Sell/Trade/Wanted   01/18/2018

      Checkout our robust classifieds for amazing deals on bikes, parts, accessories, gear & apparel 

Sign in to follow this  
Followers 0

How to select the right goggle & lens


ThumperTalk

clip_image001.jpg

 

Goggles are a crucial accessory in any off-roader’s gear bag. They can be the difference between a comfortable ride and a dirt-in-the-watering-eyessunburned-face miserable experience. It is important, however, to properly select a goggle that best suits one’s riding tendencies and locations. There are so many types of riding, as well as many different riding conditions, and the proper goggle (and lens) can make all the difference. Every goggle should have these core features:

  • Quality hydrophilic foam
  • Interchangeable lenses
  • Silicone-lined strap
  • Venting
  • Polycarbonate lens

The aforementioned features are vital to the performance of the goggle, but it is also very important that the goggle fits the riding application, face, and helmet. The better a goggle fits inside the opening of a helmet, the easier it is to create a nice seal of foam around the eyes. When choosing a goggle, have your helmet close by. A goggle may fit nicely around your face alone, but it may fit completely different with the helmet on, or even the opposite. Sometimes a goggle can compliment a helmet by naturally fitting inside the opening and creating a seamless connection of goggle and helmet. With your helmet on, try different goggles on, making sure the strap is even and straight around the sides and rear of the helmet. Grab the sides of the goggle frame and adjust the fit inside of the helmet opening, doing your best to seal the foam around your face. Make sure the goggle does not press down too much against your nose; for this can limit your breathing through the nostrils.

 

Once you have found a frame that matches well with your face and helmet, it is time to choose the best lenses for you style of riding.
Every off-road enthusiast should have a clear anti-fog lens. They can be used in all conditions and perform the primary function of goggles---protection. As conditions vary, and can potentially hinder vision, different lenses can be used to compensate. The following breaks down a variety of lenses offered by Scott, including their tint and ideal application.

 


ccs-3-0-01842600-1369511483.jpg


In addition to standard lenses, thermal models are also available for cold conditions. Offered by Scott in a variety of tints, these dual-paned lenses work under the same principle as a home’s storm windows. The insulating airspace between the two lenses reduces the temperature gradient between the outside environment and the eye port. This drastically reduces fogging in harsh conditions.

 

For a lot of riders, motocross and off-roading are more than just a hobby. For some, it is about racing, competing, winning, and advancing. For those riders, more advanced goggles and accessories are available to help provide an edge over the competition. Goggles equipped with multi layered face foam, tear-off posts, and attachments such as noseguards and ventilation visors used along with tear-offs and film systems are the best tools to battle roost, mud, rain, and sweat.

 

Tear-offs: stacks of thin, clear shields that cover the original lens. When the top layer gets covered with mud or moisture, the rider can tear off the top layer, revealing a fresh, clean layer, and thus providing a clear view. Film Systems: An alternative to tear-offs (or used in conjunction with) is a film system. Using the same idea of a camera, a film strip is stretched across a goggle lens with canisters on either end. As the goggle gets covered with mud, etc the film can be advanced to reveal a clean section and a clear view through the goggle. In the most extreme cases, film systems and tear-offs may be used in one system, such as the Scott WORKS Systems available on NoSweatXi and HiVoltageIII goggles.


Sign in to follow this  
Followers 0


User Feedback


There are no comments to display.



Guest
This is now closed for further comments

  • Similar Content

    • By LSHD
      WARNING: On Oakley lenses (not sure if all) there is a thin plastic coating on the inside, probably for anti-fog. The plastic in these stickon lenses will make that thin coat sticky. I was able to remove the coating with lots of hot water and paper towels, which probably ruined the lens anti-fog. We'll see. I removed it since it was already messed up by the stickon lenses. Did not see this issue on the Scott lenses I have used so far.
       
      Stick on Bifocals by Zcifi Lenses +2.00 - 3 Packs

       
      Just get wet and apply to goggle lens. Sticks there forever, but will just peel right off, no glue used (just surface tension). Get a new lens? Just peel off, wet, and reuse. Fantastic product.
      Been using these since Feb. 2016, so just over one year. This pair has stuck on perfectly all that time. In the photo they have air behind them because I pulled the lens and washed it hard in the sink. Just add a drop of water and they will stick right back down perfectly. When I had them in the goggles and washed them with windex they never came undone. Stayed on perfectly.
      2.0 diopters is a good magnification for me. I can read my GPS, trail maps, make carb adjustments, wrench on the bike, all without removing my goggles. Overall a fantastic product that costs about $13.50 each if you buy a 3-pack.

    • By axeman
      ********SOLD****************
       
      4 pairs Scott 89/Recoil goggles, red/white, 1 pair Utopia Slayer, red/black, all excellent condition.
      Will include 1 spare lens of choice (from available remaining at the time) with each Scott goggle and a few tearoffs if desired while they last. $10/pair.
      Utopias come with 3 spare lenses, plus a mostly-full pack of tearoffs. $20.
      OR GET EVERYTHING FOR $50 + SHIPPING
      Shipping Priority Mail $6 for 1 pair, $12 for multiple pairs.
      All goggles come with cloth bag.
      I am switching over to the new Scott Prospect goggles.
    • By shuttlefever
      Hey all, I am a rider in the Pacific Northwest. Just a casual trail rider but really like riding. My eyes have been progressively getting worse over the years so I am no longer comfortable with contact lenses and good glasses when I ride. I hate goggles as they instantly fog up even when I anti fog the crap out of them.  Wrap around glasses have been my go to for years. My question is, is anyone using an insert or wrap around style glasses with inserts or anything like that? My script is so strong I can't use wrap around lenses normally. Has anyone got any advice?? Thanks !!!
      D~
    • By motoxjeff
      Whats the difference between the Crowbar and Mayhem goggle? I have a Bell Moto-9, and I want to make sure they fit. Sometimes with these goggles they come down to far on my nose, and kinda cuts of breathing....