Sign in to follow this  
Followers 0

Husqvarna Motorcycles achieve record breaking sales and turnover in 2014


Bryan Bosch

January 29, 2015 - (Motor Sports Newswire) - 2014 has been a momentous year for the Husqvarna brand. Enjoying record figures in sales and turnover, a total number of 16,337 motorcycles were sold. Passing the magical 100 million Euro mark in turnover, this growth provided Husqvarna Motorcycles with production and sales figures never before achieved during the iconic brand’s 111 years of motorcycle production.

Husqvarna gained significant market share in the enduro competition segment as well as making an outstanding restart into the motocross segment, where close to 6,000 Husqvarna motocross bikes were sold worldwide. As such the brand has re-established its position as a key player within the offroad motorcycle segment. In 2015 Husqvarna will pursue its growth strategy.

2015-husqvarna-product-line.jpg

husqvarna-action1.jpg


Sign in to follow this  
Followers 0


User Feedback


Can you believe such an idiot rides a Husky.... almost makes ya wanna puke......sorry to the big H for being such a LOSER......maybe H should be tattooed on the center or my forehead instead of the standard L for LOSER, in my case it would be an L FOR loser.....

Share this comment


Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By WilbertSM4L
      Hi all, 
      Back after a hiatus from supermotos after I sold my KTM 625SMC. Now I've got a 701SM (2016) and ... of course, fuel injection, no more carbs! 
       
      Couple of questions I hope someone can help with - the bike already had a few mods: 
      Akrapovic slip on, with EVO Airbox mod. 
      power commander V 
      ABS dongle mod
      Those are all that's really relevant for this post. 
      Essentially the previous owner told me that 0 was the bad quality fuel map, 1 was sport map and 2 onwards were standard maps. Doing a little digging, it turned out this wasn't quite correct. 
      1 is the soft map, 2 is the sport map and 3 onwards are standard as far as I've found. 0 is of course the bad fuel map only for dire situations on low octane. 
      My question is, will the PCV change these maps at all? 
      I don't know where to control the PCV maps 'on the fly' - seems this requires a separate module? 
      Other than this I think I have it right that the PCV control injection, whereas the underseat switch controls ignition timing. This would make sense given that on low octane, preventing detonation is usually Achieved by regarding ignition. 
       
      Can anyone correct me or give any of their findings? 
       
      Thanks 
      Wilbert
    • By Drewbwislock
      On my 2008 rmz 450, at 1/4 throttle there's this horrible studder. It started about a month ago. The bike has about 70 hours on it i bought it later last year and never had a problem with it. The only thing that i changed on it was the header pipe it had the stock one and i tweaked it where it was making a weird noise so i replaced it with a stock one.
      Things i have tried............................
      New spark plug
      Cleaned the air filter 
      Oil change 
      Checked the valves one exhaust is on the loose side but not out of spec.
      I may try injector cleaner but idk if thats ok for these bikes.
      Any help is appreciated thanks in advance 
    • By Drewbwislock
      On my 2008 rmz 450, at 1/4 throttle there's this horrible studder. It started about a month ago. The bike has about 70 hours on it i bought it later last year and never had a problem with it. The only thing that i changed on it was the header pipe it had the stock one and i tweaked it where it was making a weird noise so i replaced it with a stock one.
      Things i have tried............................
      New spark plug
      Cleaned the air filter 
      Oil change 
      Checked the valves one exhaust is on the loose side but not out of spec.
      I may try injector cleaner but idk if thats ok for these bikes.
      Any help is appreciated thanks in advance 
    • By Huskyfe501
      I have a 2018 Fe 501 with only about 60 Miles on it. I noticed today that at idle, if I blip the throttle quickly and then let off the engine will either bog down or die completely. I thought it may be related to the JD tuner I had just installed last night, but I unplugged the tuner and it is still doing it. Has anyone else had this issue? Please help!
    • By shaggnater88
      Hi Im Shaggy, Long time lurker first time poster.
      I bought a new 2018 Husqvarna FE501 and drove it 50 miles to my home. In stock form it vibrates like crazy, The front and rear tires oscillate up and down at anything above 50mph,, and the seat is terrible for anything but offroad.
      Parts Ordered are
      Ktmandhusky exhaust cap Ktmandhusky smog delete TPStool Seatconcepts seat (Blue) Polisport clutch guard (Blue) Spoke weights Now moving on to the Questions, Whats the easiest method to removing the TPS cover? Whats the electrical connector inside the airbox? Who besides Munn Racing does the EURO map (PM ME PLEASE)? Without the euro map installed, Will the factory MAP switch work on the 2018 model???  Thanks and greetings to you all..