Jump to content
Sign in to follow this  

Malcolm Smith Racing Introduces Stainless Steel Footpegs


Bryan Bosch

STEP IT UP!
Malcolm Smith Racing Hard Parts Foot Pegs Are Outstanding In Their Field

 

August 11, 2016 Irvine, CA — The Malcolm Smith Racing Collection has to live up to the standards set by the legendary Malcolm Smith himself. From the tip of Baja to the Roof of Africa for Six Days and On Any Sunday, Malcolm Smith has been there and won that! Every component in the collection is engineered to not only survive but thrive in the most extreme conditions.

 

“Before Malcolm's name goes on, some serious design goes into every product,” explains Brand Manager Jason Gearld. “Case and point, our stainless steel foot pegs. Most riders take the lowly peg for granted, but considering the only two points of contact you have with a bike are the bars and the pegs, they become critical.” The tougher the terrain, the more important it is to be up on the pegs and in total control.

 

With that in mind Malcolm Smith Racing pegs feature an exclusive arched cleat design to provide for better positioning and enhanced control. Further improving feel and control are the 55mm wide foot beds and aggressive cleats to keep the riders feet firmly planted at all times.

 

ccs-3-0-79037000-1471283443.png

 

Corrosion-resistant stainless steel construction ensures that these pegs will last a full Six Days, if not the lifetime of your bike, quips Gearld. “And they will look damned good doing it!”

 

· Stainless steel cast construction resists rust and corrosion for added life and durability
· Exclusive camber/arched cleat design aids in enhanced rider positioning and control
· A 55mm wide platform provides for comfort and control
· Aggressive peaked cleat pattern keeps rider firmly planted in all weather conditions without tearing up the soles of your boots
· Open flow-thru design keeps mud and rocks from building up
· 13mm (1/2″) rear offset for larger feet or to achieve a more rearward position
· Made in the U.S.A.

 

“When it comes time to step up your off-road game settle for nothing less than legendary!” says Gearld. “Keep your elbows up and your feet on Malcolm Smith Racing pegs.”
Get more details here:
http://msracing.com/hard-parts/controls/foot-controls/footpegs.html

 

ccs-3-0-16117300-1471283432.png

 

###

 

About Malcolm Smith Racing HardParts:
Malcolm Smith Racing off-road products bear the name of the most legendary off-road racer of all time and we are honor-bound to live up to the legacy. Built to perform, to last and to survive more extreme conditions than your ordinary parts. Adhering to the strictest quality and safety standards, Malcolm Smith Racing believes in bringing products to the off-road community that provide riders reassurance so you can enjoy your passion. Our passion is to ensure that our riders have the ability to ride longer in adverse weather conditions and over difficult terrain with peace of mind. Malcolm Smith Racing is your brand and our goal is to offer you the best in off-road parts and accessories. For more information about the Malcolm Smith Hard Parts Collection, visit www.msracing.com

Sign in to follow this  


User Feedback

Recommended Comments



Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By Chzman
      DESCRIPTION
       
      Fenda Extenda fender extensions are manufactured by Pyramid Plastics and attach to your bike's original fender by drilling four holes in the guard and using the screws provided. They fit neatly onto the mudguard to provide extra protection for the radiator and engine from road grit and gravel kicked up by the front tire.
       
      Do not install this item on bikes fitted with an SW-MOTECH skid plate. Upon heavy suspension compression, the skidplate can contact the Fenda Extenda, resulting in damage to the Fenda Extenda and front fender.
    • By LucidMayhem
      Heavy gauge stainless steel bracket bolts directly to your subframe under the rear fender. Eliminates the ugly stock plastic plate holder.
    • By ThumperTalk
      Color: Black

      Plastics by UFO
    • By Steven Case
      The Emperor Racing Pipe Guard Skid Plate for ’17-19 KTM, Husqvarna is the best skid plate/pipe guard combo available on the market today.  With a 3/16” thick aluminum construction, hand Tig welded wings (full length both sides) with a Emperor logo carved into each side for the bling factor, aluminum mounting brackets and high-grade metric fasteners, you simply can’t go wrong.  But now we have made it even better by offering a pipe guard version for all the 2 stroke fans out there.  It still has all the standard extras like 1/4″ thick x 3/4″ wide foam tape to place between the frame and skid plate for a nice snug fit that will eliminate any possible vibrations, a block of open cell foam is also supplied to place between the skid plate and the engine to reduce the build up of material between the skid plate and engine case.  This is the perfect product for the hard core 2 stroke loving off-road rider.
      Manufactured out of high grade 3/16″ aluminum makes the emperor heavy duty skid plate arguably the strongest skid plate available now with an extended front that protects the 2 stroke exhaust pipe
      Exhaust guard does not touch the pipe in anyway so all impact stresses are transferred back to the frame not the engine case
      Extra middle mounting bracket to help support the exhaust guard
      Both side and bottom protection against impact
      4 bolt front mounting stops mounting brackets from bending when skid plate takes a hard impact (most models)
      No need to remove skid plate to change oil
      Snug fit spacers make this skid plate quick and easy to install
      Front vented mud guard (helps to keep the mud out)
      Foam tape to put between the frame and skid plate for a nice snug vibration free fit
      Open cell foam to put between the skid plate and engine case
      Emperor scorpion engraved in each wing for some bling factor
      Optional plastic liner to mount to the bottom for better sliding
      Weight: 6lbs/2.7kgs without slip liner 7lbs/3.2kgs with slip liner
      Made in Canada
      Available for:
      Stock/ FMF Fatty pipe
      FMF Gnarly pipe
      KTM ’17-’18 250/300 SX/XC/XCW/TPI & ’19 250/300XCW-TPI
      Husqvarna ’17-’18 TE/TX/TC 250/300 & ’19 TE250/300i
    • By Bryan Bosch
      Whether you're just getting into adventure riding or a seasoned pro, choosing the best armor for your bike may not only save you thousands of dollars in repair related expenses, but can ensure you make it out of the backcountry. The BDCW skid plate is the highest rated, indisputably best engine guard on the planet—we don't call it the ULTIMATE skid plate for nothing! Why ride with anything else?
      All Black Dog products are proudly made in America!
×