Sign in to follow this  
Followers 0

New KTM EXC Factory Editions Now Available!


Bryan Bosch

November 14, 2014 – (Motor Sports Newswire) – In order to celebrate KTḾs successful enduro racing season, the ultra-cool 2015 KTM EXC FACTORY EDITION range, with various upgrades over the standard models, are now available to purchase in KTM dealers.

2015-ktm-factory_exc_300_ri_front_1024-1.jpg

KTM 300 EXC Factory Edition

With KTM being the dominant brand in enduro racing, and following on from more success in the Enduro World Championship with Christophe Nambotin and Matthew Phillips taking the title wins in E1 and E3 along with many individual and national titles during 2014, KTM is excited to announce the release of its limited edition MY 2015 KTM EXC FACTORY EDITION machines.

2015-ktm-factory_exc_350_f_90de_1024.jpg

KTM 350 EXC-F Factory Edition

Compared to the standard versions, these special models have received various detail upgrades with parts and accessories designed

to the very highest level by KTM’s R&D department in Mattighofen, Austria. The increased specification of the FACTORY EDITION

machines include genuine factory graphics, orange CNC triple clamps and a factory seat with SDV logos, which offers riders the chance to truly feel like a factory racer.

2015-ktm-factory_exc_350_f_le_rear_1024.jpg

KTM 350 EXC-F Factory Edition

In addition to that, the bikes are fitted with an orange rear sprocket, engine guard, and newly developed Metzeler FIM tyres. To finish off the full factory look, the bikes also boast a striking orange frame, with orange radiators and fork guards that all make the bike almost visually indistinguishable from the true factory race machines and are sure to make these special editions

stand out from the crowd.

The EXC FACTORY EDITION model range 2015 is available in the following models: KTM 125 EXC Factory Edition, KTM 250 EXC Factory Edition, KTM 300 EXC Factory Edition, KTM 450 EXC Factory Edition, KTM 250 EXC-F Factory Edition and the KTM 350 EXC-F Factory Edition. The bikes are arriving now in international KTM dealers. WWW.KTM.COM


Sign in to follow this  
Followers 0


User Feedback


There are no comments to display.



Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By noja83
      Hi all. This is my first time posting here, been using this wonderful resource for some time though. So a brief introduction and question. I got back into riding a few years ago after a long time  away.  A couple years ago I picked up a new to me 2009 KTM 200 XC-W. I've had a lot of fun the last two seasons riding the bike, but even after a fair amount of riding and getting more comfortable on the bike, it still feels really tall and really stiff.  I ride trail and single track, some pretty steep and rocky trails here in northern CO. No MX, racing, or big jumps.
      I've spent a considerable amount of time on hold and emailing suspension companies trying to get recommendations with no response. So hopefully you knowledgeable folks here can help me out.
      I was told by the previous owner the bike was set up for a 190lb rider. I weigh maybe 140 soaking wet. I've played with the clickers and have a lower seat but the suspension seems too far out of the range for a person as light as I am. I've torn the forks down for seals and replaced a damper rod tube that had 80% of the threads snapped off where the fork cap / reb adjuster screws on (probably that 190lb previous owner going all Lennie form Mice and Men on it) causing the adjuster rod to be bottomed out just to get the cap on two threads and the clicker on the cap to be stuck. 
      I'm an experienced mechanic and have no issues with the forks and can get the shock spacer added and serviced / charged with nitrogen locally.
      My question is on spring rates. Racetech's calculator gives me .359 fork and P5 progressive rate shock. Do I want to go up in rate much from there when lowering 1" all around?
      Here's my plan, based solely on the racetech calculator and my measurements from when I had the forks apart, so your thoughts and experience here are very much appreciated.   
      Stock spring dimensions are 43.2 x 508 x .41. The rate in there now is unknown.
      I plan on using Racetech 42.7 x 493 in a .38 spring rate. That's .6 in shorter, There's enough shims up top to remove to get correct preload with an inch lowering spacer at the bottom.
      For the rear stock is 8.4 rate. I can't find any marks to guess what's in there right now. I am planning to use the P5 from racetech, again based on their calculator.
      Sorry for the long winded post, I'm a mechanic raised by a machinist and I've been trying to work this out for a while.
       
      Thanks in advance,
      Noah 
       
    • By Husquire
      Checking my valve clearances and trying to take out the cam chain tensioner. Seems the frame blocks the removal, if I just unscrew the unit as a whole, bring it out to give slack, can I then just screw it back in or do I need to reset the tensioner? Anyone have a way to get this out without removing the head?
    • By Jaundre Allers
      Hi all i have a 2016 ktm 125 sx with 3 hours on and it has n weird bogging issue.
      It runs great with lots of power until i dont ride on the pipe for about a minute, then i have to clear it up again.
      Or it would just platter until it cleans itself.
      please guys any advice would help, this is driving me crazie.   
    • By Jaundre Allers
      Hi all i have a 2016 ktm 125 sx with 3 hours on and it has n weird bogging issue.
      It runs great with lots of power until i dont ride on the pipe for about a minute, then i have to clear it up again.
      Or it would just platter until it cleans itself.
      please guys any advice would help, this is driving me crazie.   
    • By MotoXRacer_19
      I just stumbled across a hell of a deal on a brand new FMF Megabomb for a 2014 KTM 350 SX-F. However, I have a 2014 KTM 350 XC-F, and on the ad it says the pipe fits the SX-F models but says nothing about fitting the XC-F.
      Does anyone know if the head pipes on the SX-F's and XC-F's are interchangeable? I assume they would be since they are identical motors, but I don't want to order it and be SOL.