• Announcements

    • Bryan Bosch

      Buy/Sell/Trade/Wanted   01/18/2018

      Checkout our robust classifieds for amazing deals on bikes, parts, accessories, gear & apparel 

Sign in to follow this  
Followers 0

Sub-200lb. Tire Weights


Swiss

TIRES: Note, tire weights can vary even with the same model tire.

18” liner 1.4 oz

21” liner 1.6 oz

Rimlock Small ..............1.5” 2.4 oz

Rimlock Medium ..........1.6” 2.3 oz

Tube ...Ultra HD.............110/100x18 ....... 2 lbs 7 oz

Tube 17” ........................used w/water..... 1 lb. 3.0 oz

Tube Bikemaster TRC....2.75/3.00x21 .... 1 lbs 2.1 oz

Barum .....used................3.00/3.20x21 ....10 lbs 3 oz .....Chuck.XR200 used

Bridgestone 51M.............80/100x21 ........ 8 lbs 10 oz ....Chuck.XR200 used

Bridgestone M23 ............80/100x21 ........ 9 lbs ..............Chuck.XR200 used

Bridgestone M40 ............80/100x21 .........8 lbs 15 oz.....Chuck.XR200

Cheng Shin ....................3.25x21...............8 lbs 4 oz ......Chuck.XR200 used

Dunlop ........D742 .........80/100x21 ..........8 lbs ........... .Chuck.XR200 Med-hard to med-soft

Dunlop ........D756 .........80/100x21 ..........8 lbs 4 oz Chuck.XR200 Intermediate to soft (popular)

Dunlop ........D803 .........2.75x21 ..............7 lbs 1 oz Chuck.XR200 Trials

Dunlop ........D952 .........80/100x21 ..........7 lbs 14 oz Chuck.XR200...........................8lbs 8oz. H Bomb

Dunlop ........D756F.........80/100x21...........7 lbs 3.5 oz Swiss 51M

Maxxis ........IT ................80/100x21 ..........9 lbs 4 oz ... Chuck.XR200

Michelin ......M-12 ..........90/90x21 ............8 lbs 14 oz Chuck.XR200 Medium

Michelin ......S-12 ..........90/90x21 ............8 lbs 7 oz Chuck.XR200 Soft

Pirelli ...........MT21 ..........90/90x21 ............9 lbs 0 oz Chuck.XR200

Dunlop ........D752F ........70/100x17 .........5 lbs 1.1 oz ....used

Cheng Shin ....................5.60x18 ..............14 lbs 6 oz Swiss

Dunlop ........D756 .........110/100x18 ........12 lbs 5 oz Chuck.XR200 Intermediate to soft (popular)

Dunlop ........D803 .........4.00x18 ..............13 lbs 8 oz Chuck.XR200 Radial Trials

Dunlop ........D952 .........110/90x18 ..........10 lbs 14 oz Chuck.XR200

Dunlop ........D952 .........120/90x18 ..........13 lbs 4 oz Swiss 65M

Michelin ......M-12 ..........120/90x18 ..........12 lbs 4 oz Chuck.XR200 Medium

Michelin.......M-12 ..........130/90x18 ..........12 lbs 7 oz Chuck.XR200 Medium

Bridgestone 604 ..............120/80x19 ......... 12lbs 6oz H Bomb

Bridgestone 404 ..............110/90x19 ......... 12lbs............H Bomb

Bridgestone 404 ..............120/80x19 ......... 12lbs 3oz H Bomb

Dunlop ........952 .............110/90x19 .......... 11lbs 8oz H Bomb

Dunlop ........952 .............120/90/x19 ......... 12lbs 3oz H Bomb

Dunlop ........D756 ...........110/90x19 .......... 11lbs 10oz H Bomb

Dunlop ........756RR ........120/80x19 ........... 11lbs...........H Bomb

Dunlop ........773 .............110/90x19 ........... 12lbs 13oz H Bomb

Dunlop 745 120/80/19- 12.2lb

Info posted from Chuck,Swiss, ...H Bomb,


Sign in to follow this  
Followers 0


User Feedback


There are no comments to display.



Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By deanmellor
      My top end went on m 98 cr 125, the needle bearing clip came out and broke apart and shrapnel got everywhere and blew it up. I cleaned out the top end and washed out the crank with the bike upside down. the bike starts up great and seems to run fine but im getting a weird di-di-di-di-di-di-di noise coming from the motor. i tried adjust the power valve and tightening everything but the noise is still there. Here is a link to a video where you can hear the sound. It gets louder as rpm's get higher and at really low rpm barely idling it goes away. I am pretty new to bikes and 2 strokes so any help would be appreciated.
      https://youtu.be/msfU8WCXg8E
    • By RidingWithStyle
      In need of Cycra Handguards (probends) for my bike. Need 1 1/8 clamp size for renthal twinwalls. Message me if you have any for sale at a good price! 
    • By Baja Designs
      Hello CRF450R Owners,
      Bailey here with Baja Designs.  We recognize ThumperTalk as one of the go-to sources for information on the CRF450R and we receive emails daily regarding the best inexpensive light setup or purchasing the B1K setup ran by Ox Motorsports.  We would like this thread to be a General Discussion area for members and guests to discuss Dual Sport Kits (DSK), Lights, and Lighting Acessories based upon stock and modified charging systems.  Please Post up if you have any questions or comments CRF450R related! 
      www.bajadesigns.com

    • By Chumbag
      I want to get a cheaper used FMF exhaust for my bike. The one on eBay I was looking at had some dents in it. Do dents in the muffler have a big impact on the performance? Also the pipe looks to be turned the wrong way does that rotate? I don't want to buy this if the pipe will not rotate because I think it looks like its turned the wrong way and wouldn't fit.

    • By jen_92_sm
      Hey guys, 
      I am really needing some good advice here from anybody who has ever owned or rebuilt classic Yamaha 2 strokes (1989 - 1994). I live in South Africa, and bought a little farm thumper while on holiday this past weekend. It was advertised as a DT175 which is a bike that is easy to get parts for down here. It has been cosmetically customized and looks pretty darn cool... and lets face it, all the old classic Yamaha 2T engines look the same at a glance! So I genuinely thought it was a naked DT. The bike had no papers, and was used purely for the farmer to putt around on his farm.
      The only things needing attention was the stator cover which had snapped in half - this was visibly noticeable, and a little leak from a badly resealed gasket (both generally easy and cheap to fix here). The bike was still running and idling fine, started first kick, and I had a little ride around the farm before loading the bike up onto my pickup and heading off, thinking I could fix this thing up nicely in no time for next to nothing, and have what we call down in SA "a nuwe speelgoed" (A new plaything) for the weekends when I am not riding my beloved and reliable DRZ400SM. 
      SO, I get home and decide to contact our local Yamaha branch, out of interest, to find out the history of the bike before I start fiddling (Don't ask me why I did not do this all before I bought the bike - It was a spur of the moment purchase, and was sold to me for dirt cheap!). I send off the VIN and engine number. Comes back, and this little freakin' turd turns out to be a 1989 TDR180!! WHAT. But now I am stuck as we do not really have TDR's down here - and I have never even seen one myself.
      Long story short - What alternative could I use as a stator cover? Do any other old Yamaha 2T model stator covers fit the TDR or share similar engine parts? Ordering from Ebay is so expensive thanks to my country being in junk status due to a junk president. So the shipping costs more than the actual item does, and our customs is a joke too. Yamaha has also advised me that this stator cover has been discontinued.
      I have put up local ads looking for parts, contacted FB 2T groups, and local shops. Nothing for TDR's has come back yet.
      Any advice or sharing of experience is welcome!