Using an Android smart phone as a GPS

Start posting and please mr. Moderator pin it !!!!
My 2012 498RR

Just opened it up in preparation to get started with jets and needle set up. I am somewhat bewildered by the fact that there are no markings whatsoever on the jets, needle or slide.
 
I have some misc. Keihin jets kicking around, and they all have the size and some with the Keihin logo stamped on them. Is it that the newer models/parts are no longer marked? Or should I be concerned about the authenticity of the carb manufacturing. (i.e. clone)  Everything about it looks authentic, including the box and part numbers.
 
BTW, intending on putting this on a basically stock 2004 CR250.  With FMF Fatty, FMF Shorty muffler, V-force reed cage and a +10 oz. Steahly fw weight.
Running 50/50 91 pump and Sunoco GT260+ at 40:1 Bel-Ray H1-R.
I haven't checked squish yet.
 
Got tired of fighting with the stock Mikuni. Could never get it right. Close, but not the way that I think it should be.

I searched and couldn't find a similar thread. Modding season is upon us.I cleaned and oiled my air filter, changed my 13 tooth cs to a 14, cleaned and lubed the chain, changed the oil and filter, and installed my Battery Tender. It was a good day. Tomorrow, I ride. ?

MOTORCYCLE TYPE
Enduro

ENGINE SPECIFICATIONS
Displacement (cc): 499
Cylinders: 1
Engine Stroke: 4
Speeds: 5 Speed

TRANSMISSION SPECIFICATIONS
Number of speeds: 5 Speed
Dry Weight (lbs.): 260
 

Camo Gray Colorway