Ktm250sx 07 spring rates 110kg-115 kg with gear

[14gon]

Hi all I have a 07 ktm250sx that I use mostly for enduro and a bit of mx work, average weekender speed , i have to replace my fork seals so I want to sort the suspension out while I'm there, what a good base setup to work with , spring rates and rebound/comp, sag, oil volume and weight etc, I have seen that I may be able to use the 450sxf shock spring ? I don't want to spend heaps as a husaberg fe350 is not far away but I want to keep the 250sx aswell and have it setup ready, any other tips and tricks on this bike would be greatly appreciated aswell. Thanks, Josh.

[14gon]

Also as the topic says I weigh between 110-115 with gear on, cheers

[14gon]

Can anyone help me out?

[14gon]

Surely someone can help me out .

[challenger05]

I have used the racetech website on a few bikes to work out spring rates and find it ok. allows for weight and type of riding etc.

I needed to go up several spring rates because i'm 120kg.

[Hans Schmid]

.50s in the front or .49s if you like it slightly softer.....PDS 6 in the rear.....

Set all your adjustments in the middle. SAG should be around the 108-110 mark, forks slid down in the triples to where the fork cap is....

If you can afford it, I would also get rid of the stock pistons in exhange for a woods pistons.....

[14gon]

Great thanks guys, I did go on the racetech website and it did say the spring rates that were quoted above, thanks alot ill see how it goes.