2013 front brake issue

so during a recent moto, i happened to lose the front end at quite a good pickle, i fell hard onto the brake side of my handle bars

and after getting up and trying to remount, my front brakes were dead locked and the lever had all kinds of pressure!

i kicked the caliper a few times and it finally let go, rode back to the truck where it started to lock up again.

any ideas of what could have caused this? the caliper moves freely on the pins, the rotor is not bent, the caliper bracket is not bent,

i just want a bit of insight before tearing it all apart

thanks

Take the lever off and see if you bent the part that goes into the master cylinder.

Take the lever off and see if you bent the part that goes into the master cylinder.

+1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now