TTR 125 VM24 carb swap

I've got a ttr 125 with a vm24 round slide mukini carb, runs like a champ with the jets I have in it but for only about 5 mins at a time, when I pull it apart there's fuel puddles up on the lip of the boot where the carb meets the motor. Why would fuel be getting by the carb? Float level? Float sticking? TTR guru's I need some help.

I've got a ttr 125 with a vm24 round slide mukini carb, runs like a champ with the jets I have in it but for only about 5 mins at a time, when I pull it apart there's fuel puddles up on the lip of the boot where the carb meets the motor. Why would fuel be getting by the carb? Float level? Float sticking? TTR guru's I need some help.

Float sticking or floa level. Most likely you need to clean the float needle and needle valve.

I would like to do this swap. What throttle cable do i need to swap on to a 2001 TTR 125?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now