Jump to content
Sign in to follow this  

Side to side throttle play

Recommended Posts

How much side to side throttle play is normal and how do you adjust it out?

I've tried loosening the two phillips head screws that hold the throttle assembly to the bars, holding the throttle up against the bars and tightening the screws but it doesn't appear to have done much.

Share this post


Link to post
Share on other sites

How much side to side throttle play is normal and how do you adjust it out?

I've tried loosening the two phillips head screws that hold the throttle assembly to the bars, holding the throttle up against the bars and tightening the screws but it doesn't appear to have done much.

stock throttle tubes are plastic and wear out over time causing play

Share this post


Link to post
Share on other sites

123devinzz1, what throttle tubes do you use or recommend ?

thanks !

Never bothered me enough to replace stock one. You can get aluminum ones such as the tusk ones where it rides on a bearing and is nice and smooth.

Share this post


Link to post
Share on other sites

If your talking about the actual throttle tube being loose, then ignore it like Krannie said.

But if your talking about freeplay in the throttle cables between throttle off & throttle on, then you can adjust the slack down near the carb.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...