Spark plug update?

[raden]

Hi

I was wondering if anyone is using a different plug other than what factory listed, maybe a wire core instead of copper electrode or even non resistored for better performance.

[adam728]

At most you'll gain a little-known resistance to fouling. Otherwise theres really no power to be found via spark plug in this bike.

[Mikel.Laundry]

you wont notice a diffrence.

[NitrousR1]

You must use a resistor plug because of the electronic Cdi on the bike, damage can occur using a non resistor plug on a electronic ignition bike

[2strokeYardSale]

BR8EIX seems to start a hair more easily and offer better throttle response. Probably offers better fouling resistance.

[Speed-Freek]

BR8EIX seems to start a hair more easily and offer better throttle response. Probably offers better fouling resistance.

I have that in my bike now, going on 70 hrs on the same plug ( I run a top end for 80 hours and do the plug, piston and rings at the same time), never fouled, however I had a standard copper one before and lasted just as long and didnt notice ANY difference on the butt dyno, lol.