Jump to content
Sign in to follow this  

01 250 wr handle bar risers

Recommended Posts

If I add 30mm risers to the bike. Will all the cables still reach? To me it looks too short. But I guess it can be deceiving. I was looking at the tusk risers which are 1.2 inches taller.

Share this post


Link to post
Share on other sites

If I add 30mm risers to the bike. Will all the cables still reach? To me it looks too short. But I guess it can be deceiving. I was looking at the tusk risers which are 1.2 inches taller.

Usually you need to buy a longer throttle cable from motion pro or similar. You may also need a longer front brake line but that would depend on how much slack you have now.

Share this post


Link to post
Share on other sites

30mm riser that is over an inch are You sure they are 30mm

I put 15 or 16mm (don't remember which) on my 06wr250 there were no problems at all

that is with stock handler bar that is a factor that will affect cable lengths skinnier or wider bars

I love them when I stand up I am I not leaning over the bars

Share this post


Link to post
Share on other sites

I have a GPR mounted under the bars,with 30mm risers.Original cables will be fine.

Edited by rushdog

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...