What did you do to your Yamaha YZ 2 stroke today?

[Jace Perez]

FRESH... 

Thanks it took a lot of scotch bright and simple green.

[Familyman6000]

Installed a GYTR flywheel. Won’t be able try it out until Friday.

[2strokeYardSale]

Sunday I went for a ride to try out my new helmet cam. I had a fresh Shinko 505 Cheater, which wasn't great in the snow and mud. There was too much snow so I made it a short ride, ending at my trials practice area.

 

[Wise head to fifty]

Picked up some Ti Pro-Pegs at a bargain price 

[Jace Perez]

Stripped to frame and scotch bright and polished up everything for the winter cleaning and it looks amazing imo.

Subframe before and after

[Jace Perez]

Build is finally done

[motoxvet]

8 minutes ago, Jace Perez said:

Build is finally done

Very nice.  I see you're single.

[Tahoe Gator]

Build is finally done

You have a game room built around your bike? Brilliant!

[YZDOC]

4 hours ago, Jace Perez said:

Build is finally done

Build is incomplete. 

This part is missing and only cost $2.00. 

?

[Tahoe Gator]

G2 bar end inserts. Got tired of the spreader type coming loose. A bit of sweat tapping the threads with just a 10” wrench. One trick on assembly: as they come, when you back out the bolt, the inserts come out too. Trick I found was to have much less of the bolt inside the thread so that the bolt had less purchase on the insert.

[YZDOC]

4 hours ago, Tahoe Gator said:

G2 bar end inserts. Got tired of the spreader type coming loose. A bit of sweat tapping the threads with just a 10” wrench. One trick on assembly: as they come, when you back out the bolt, the inserts come out too. Trick I found was to have much less of the bolt inside the thread so that the bolt had less purchase on the insert.

Love those. They work fantastic, never pull it, and I haven’t bent bars for some time. 

[Jace Perez]

Very nice.  I see you're single.

Haha nope, just basement is my place [emoji23]

[Jace Perez]

Build is incomplete. 

This part is missing and only cost $2.00. 

That part only goes on the left side of the swing arm

[YZDOC]

17 minutes ago, Jace Perez said:

That part only goes on the left side of the swing arm

I know, the left one (half moon) and is installed, the right one (round) is missing. 

So if you are telling me your bike only has one on the left, you are wrong. 

Pick any years from 02-19 as you see 34, and 35 as the part  01 and early have both round ones. 

 

 

actually under $2.00. 

Edited January 19, 2019 by 2 STROKE YZ DOC

[Jace Perez]

I know, the left one (half moon) and is installed, the right one (round) is missing. 
So if you are telling me your bike only has one on the left, you are wrong. 
Pick any years from 02-19 as you see 34, and 35 as the part  01 and early have both round ones. 
 
 



actually under $2.00. 

Dang I didn’t even know I gotta pick on up

[YZDOC]

2 hours ago, Jace Perez said:

Dang I didn’t even know I gotta pick on up

You know, I am the Doc, aka YZDOC Restoration, and I’m messing with you. Don’t take it the wrong way. 

Nice build, these caps keep the mud out, and give it a finish. They also dye black if needed. 

 

[J_YZ2fittyX]

Well, just got it (16 250X) and since its 16* and snowy today I decided to tear down the moving parts. Neck bearings were a known issue as this bike sat for a while (owner had a few bikes). Pulled the linkage and swingarm bolt to clean/grease. Bout it for now, but the list of add-on wants is growing!

[Tahoe Gator]

Well, just got it (16 250X) and since its 16* and snowy today I decided to tear down the moving parts. Neck bearings were a known issue as this bike sat for a while (owner had a few bikes). Pulled the linkage and swingarm bolt to clean/grease. Bout it for now, but the list of add-on wants is growing!

Pics?!

[EmpireofDerp]

I went out in the sloppy wet woods and tried not to displace any of my "neck bearings". Was great!

[markmc2]

03 125, replaced shift oil seal, installed billet kickstand, installed new pipe silencer joint seal, installed hand guards, tuned carb, and rode it to my neighbors.