Rekluse Installation Help

[JS117]

I'm in the middle of installing my Rekluse Core EXP and hit a wall...

I've taken out all of the stock components except for the center clutch which will not budge from the mainshaft that has a bunch of teeth around the outside that it fits onto. 

 

Can anyone give me any advice? 

 

2012 350 SXF

 

Thanks

[Woodsweapon350]

Just did mine today, same bike. Did you take the nut off? If so just grab it with two pairs of pliers and pull it off, its probably just oil causing a suction

[JS117]

Just did mine today, same bike. Did you take the nut off? If so just grab it with two pairs of pliers and pull it off, its probably just oil causing a suction

I thought this too. but with the amount of strength im putting into it trying to pull it out, it cant be suction. and yes the center nut is off

[Woodsweapon350]

There's nothing else to hold it on, pull harder

[JS117]

There's nothing else to hold it on, pull harder

Trust me I am. I wouldn't have posted this thread lol

[Markee33]

Propane hand torch and put a little heat on it around the shaft in a circular motion for even distribution. Should pull right off.

[JS117]

I got it off thanks everyone. 2 sets of pliers did the job