Jump to content
Sign in to follow this  

2013 450r won't start

Recommended Posts

Hey guys. I volunteered to help a friend out with his 2013 crf450r. He tried to start it the other day and it won't run. It ran Great until the other day he was riding around and it completely bogged down so bad it could be recovered from. It doesn't feel quite rite when your kicking it either. I checked plug, carb, pump. Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites

No carb on that bike, it uses a throttle body EFI system. How did you check the TB? How did you check the pump?

I would start with a good tank-off washing of the motor, then remove the valve cover and check valve clearances and cam timing while you're in there.

Edited by Eddie8v

Share this post


Link to post
Share on other sites

No carb on that bike, it uses a throttle body EFI system. How did you check the TB? How did you check the pump?I would start with a good tank-off washing of the motor, then remove the valve cover and check valve clearances and cam timing while you're in there.

Ok. He's doing it right now.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×