Jump to content
Sign in to follow this  

High idle when warm and hard to kick start now, cold and warm?

Recommended Posts

I bought a 06 crf250r 4s, about a month ago, it started and run great . Execpt now i have an high idle after it gets warm, and problem with starting it cold or warm. It runs good and plenty of power still, but now when im just ideling in first gear and get in the throttle its "slow" to hook up at times, kind of like a dead spot in the throttle?? 

Any suggestions??   Thanks.

Share this post


Link to post
Share on other sites

Valves would be the first place I would look if my bike was hard starting. Tight clearances are usually the reason why these bikes can be so hard to get started.

Share this post


Link to post
Share on other sites

Valves would be the first place I would look if my bike was hard starting. Tight clearances are usually the reason why these bikes can be so hard to get started.

 

Thanks for the info MJ... I just had bought the bike and come to find out, i was the problem..lol.. Just had to get use to "knowing how to start it"....  About 3 full quick shots of throttle on cold, and it fires right up.  After its warm, 1/4 inch on the throttle and she fires right up...  Thanks again... 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×