Jump to content
Sign in to follow this  

RM 250 shock rebound stack...too light?

Recommended Posts

My shock rebound stack is as follows:

 

40.2

40.2

28.1

40.2

38.2

36.3

34.3

32.3

30.3

28.3

26.3

24.3

 

rebound adjuster seems to have very little effect. Could my stack be too light, and and allowing oil through the piston instead of through the bleed (path of least resistance)

 

spring on rear is a 5.5, and linkage is freshly serviced with new bearings.

Share this post


Link to post
Share on other sites

It's a 2008. I thought the stack was very close to the 2009 RMZ 250 which was suggested to me. Maybe I got the wrong stack info.

Share this post


Link to post
Share on other sites

You want 6-7 face shims of 0.2 and all 0.3 in has with a 26clamp

Share this post


Link to post
Share on other sites

If I remember they had a 3stage rebound stack on the rm250

Share this post


Link to post
Share on other sites

If I remember they had a 3stage rebound stack on the rm250

Do you have any idea what the 3 stage build up was?

You want 6-7 face shims of 0.2 and all 0.3 in has with a 26clamp

Thanks mog, I will try this next.

Share this post


Link to post
Share on other sites

Here's an '05 rebound:

 

40.2  -2

22.11

40.3  -5

40.2

32.11

40.3

38.3

36.3

34.3

32.3

30.3

29.3

28.3

27.3

26.3

25.3

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×