Jump to content
Sign in to follow this  

RM125 front sproket what do i need to get it off?

Recommended Posts

I have a 2002 RM125 and the front sprocket isn't attached like it was on my other bikes.  On my other bikes there was a nut to undue. 

 

This one is just a small hole in the middle with an odd shaped washer around it that almost looks like a little sprocket.

 

I can take pictures later If I need to just wondering if all RM125s are like this.

 

Thanks

Edited by DirtSmoker250

Share this post


Link to post
Share on other sites

Its a snap ring.

 

Never saw it before either in my life and was real nervous about running it... But after putting a new one on - it sticks pretty well on there!

 

Don't be cheap, BUY THE PLIERS! I had a buddy tell me 2 icepicks or tiny screw drivers would get it, but to hell with that. Just get the proper tool to do the job. It's on there snugger than you think.

 

*also another forum member suggested to me to put a dab of RVT, kinda silicone sealer just as a precaution to prevent it from vibrating off.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×