Jump to content
Sign in to follow this  

Crf 250 gear shifter hitting engine casing

Recommended Posts

I have a 08 crf 250 im haveing problems hitting neutral between 1st and 2nd i noticed the shift lever is touching the engine caseing i have fitted a new shift lever and its still touching im now thinking the shift spindle could be bent looks ok too look at but not sure if the problem could be inside any one had any experience off this

Share this post


Link to post
Share on other sites

I have a 08 crf 250 im haveing problems hitting neutral between 1st and 2nd i noticed the shift lever is touching the engine caseing i have fitted a new shift lever and its still touching im now thinking the shift spindle could be bent looks ok too look at but not sure if the problem could be inside any one had any experience off this

Its very likely the shift shaft is bent. This is a common issue. I would recommend buying a new shift shaft. If the one you have is bent bad enough you may have to cut the end off to get it out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×