Jump to content
Sign in to follow this  

yama-newb help

Recommended Posts

I am rebuilding 94 yz250 and the manual calls for molly grease at the tip of the bolt that hold power valves halves together.  I am not sure if this is ok.  It's on page 4-26 in the original manual.

 

also, the gold colored coating  on the top halves of the crack case is worn off in places.  Is that a big deal?

 

Thanks

Share this post


Link to post
Share on other sites

I am rebuilding 94 yz250 and the manual calls for molly grease at the tip of the bolt that hold power valves halves together.  I am not sure if this is ok.  It's on page 4-26 in the original manual.

 

also, the gold colored coating  on the top halves of the crack case is worn off in places.  Is that a big deal?

 

Thanks

 

The coloring being worn off is not an issue as long as the cases are in good condition otherwise (no cracks or other damage).

You can't go wrong using the recommended lubricants and greases listed in the OEM manuals.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×