Jump to content
Sign in to follow this  

125sx stator bad?

Recommended Posts

i have no spark in my 2005 ktm 125sx. the flywheel was pretty chewed up and the PO put it back on the bike so it a little scraped on the tape. I want to test the stator but i cant find out how to. Any help would be great   Thanks in advance

Share this post


Link to post
Share on other sites

Here's the stator the flywheel was pretty chewed up as you can tellImageUploadedByThumper Talk1381674022.931813.jpg

And I've put a new plug in already

Share this post


Link to post
Share on other sites

You can check the stator for resistance with a multimeter. Check the pulser coil green - red should test at 100Ω +- 15%. Check the exciter black/red - red/white 24Ω +- 15%.

 

I'd replace it though look kinda rough.

Edited by pastorjosh

Share this post


Link to post
Share on other sites

Stator is trashed its damaged, we have a new one for $99

already ordered one but i wish i saw this before i did.   

 

You can check the stator for resistance with a multimeter. Check the pulser coil green - red should test at 100Ω +- 15%. Check the exciter black/red - red/white 24Ω +- 15%.

 

I'd replace it though look kinda rough.

i already tried to meter it and i wasnt getting any reading other than a short between the ground and another wire (i forget which one)   but i already ordered one.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×