Revs are too low and won't adjust

Hey guys, I've got one of those cheap Chinese bikes. The issue is when no throttle is applied the bikes revs aren't high enough and it stalls. I've tried adjusting it at the throttle and it did nothing so I attempted to adjust it at the carby at the idle speed screw and with the bike running it made no change. Any suggestions?

Should have mentioned before it's a 125cc bike and it rides just fine until the revs drop and it'll die. So it's idle speed is the issue.

First step would be to pull the carb off and make sure it is clean. Make sure all jets, ports, and are passages are all clean and clear.

The next step would be to light that thing on fire and push it down the alley.

The next step would be to light that thing on fire and push it down the alley.

+1 LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now