Jump to content
Sign in to follow this  

Setting timing on my Klx110

Recommended Posts

So I took the head off of my klx110 for the first time to send it out to have some port and polish work down. My bike is a 2010. Problem is, i was reading instructions from a 2009 and older. Now my problem is, I took the head off while the piston was not at TDC. When I go to put the bike back together, how can i be sure that the timing is correct?

Share this post


Link to post
Share on other sites

So I took the head off of my klx110 for the first time to send it out to have some port and polish work down. My bike is a 2010. Problem is, i was reading instructions from a 2009 and older. Now my problem is, I took the head off while the piston was not at TDC. When I go to put the bike back together, how can i be sure that the timing is correct?

put the stator to TDC once you're putting it back together, make sure the cam loves are pointing downwards in opposite directions(valves are closed) and then set the cam chain to the cam sprocket, be sure the small symbol on the cam sprocket is at the top once it's at TDC.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×