Jump to content
Sign in to follow this  

Beta OEM vs. FMF pipe

Recommended Posts

Does anyone have both on hand and could describe shape? Are they the same or close being the OEM is made by FMF? I'd like to get the Force combo guard from Beta Austrailia but since it fits close to the pipe I'd like to know if the FMF is an option. I'll call FMF and AM Beta but it would be nice to hear from someone with both on hand. Thanks.

Share this post


Link to post
Share on other sites

They are pretty dang close, I have the fmf gnarly to replace the tinfoil stocker, the carbon fiber guard designed for the stock pipe fits very well. Not sure about the fatty

Share this post


Link to post
Share on other sites

Hey someone is not hung over!

The biggest potential problem is if the FMF pipe sits lower than the Beta OEM pipe, which sits high. The guard is a close fit, but not a contact fit like the Hyde.

I like to ride the 300 like a 250, so I like the stock pipe. It is light and I have dented it but the power is perfect for me. I think its not totally trashed because it sits so high. I'm also looking for a price on it, as if its not too $ and available then nothing to worry about. I just don't want to buy a pricey guard and then be locked into a pricey or unobtainable pipe. From my GG experience with Gnarly and Fatty, they were exactly the same pipe design, with the Gnarly made of the heavier 18ga steel. I measured and also verified this with FMF. So, any changes in the power delivery with the FMF Gnarly if its so close in shape to the stocker?

Share this post


Link to post
Share on other sites

Enduroguy has the Gnarly, try to get him engaged in this conversation. I had pretty much ruled out the Gnarly because of my experience with them on my YZ - stock pipe was much better as the Gnarly made the YZ to abrupt for my kind of riding. But if it is generally the same dimensions as stock then it would be ideal.

Share this post


Link to post
Share on other sites

I found the gnarly softened the hit significantly and really smoothed out the power and definitely added low end torque.

Share this post


Link to post
Share on other sites

Your on a 250 though, correct? 300 has more than enough on the bottom, I would not like any more. For my style an SST type or rev pipe would be better.

Share this post


Link to post
Share on other sites

I rode Tom's [Enduroguy] '14 300 with the Gnarly, came back and asked him how he got a 300 decal on his 250… Just me though, comparing it to my '13 300 with JD kit and G2 throttle with #2 cam in it. I'll stay with the stock pipe.

  • Like 1

Share this post


Link to post
Share on other sites

I rode Tom's [Enduroguy] '14 300 with the Gnarly, came back and asked him how he got a 300 decal on his 250… Just me though, comparing it to my '13 300 with JD kit and G2 throttle with #2 cam in it. I'll stay with the stock pipe.

I agree, it is probably better suited to a fast reving motor with more hit like a 250, than the tamer 300 provides. It almost makes the 250 have that semi lethargic easier to control slow reving 300 feel. But I think it is a good compromise, still more fun than a 300 and not as hard nosed and brutal as a 250.

Share this post


Link to post
Share on other sites

I really like the stock 300 power, I can ride it as I please, but I especially like the fact that I can ride it on the pipe a lot and not get beat up. The slow reving, big bottom power, and vibration of traditional 300s is what has kept me off of them for years. A KTM or GG 300 with a Gnarly I found obnoxious, but thats just me. This bike is different and don't want to change it.

Edited by GP

Share this post


Link to post
Share on other sites

Your on a 250 though, correct? 300 has more than enough on the bottom, I would not like any more. For my style an SST type or rev pipe would be better.

 

 

Your on a 250 though, correct? 300 has more than enough on the bottom, I would not like any more. For my style an SST type or rev pipe would be better.

 

 

  In this case its to bad the pipes are plated because if I remember correctly, replacing the stinger with one that sits deeper in the reversion cone will soften the bottom end and provide more hit. I'd try it on my gg but after all the work and blind alleys it took to get it to suit me I'm loath to do do anything that might take me back in a wrong direction.

Share this post


Link to post
Share on other sites

I rode Tom's [Enduroguy] '14 300 with the Gnarly, came back and asked him how he got a 300 decal on his 250… Just me though, comparing it to my '13 300 with JD kit and G2 throttle with #2 cam in it. I'll stay with the stock pipe.

Ok now BetaSteve, no poking fun :p ... Steves bike was a little snappier off the bottom and seeme to run smoother/cleaner but for me the stock 300 with a gnarley works great. I got the pipe after my stock one got crunched and bent.(2nd ride) Bottom line, I really just wanted the tougher pipe do to the kind of riding I do. To date the gnarley is holding up much better than the stocker.

Share this post


Link to post
Share on other sites

I wonder how the pipe is going to work with the new head and cylinder porting on the 14 race the knarley may be tooo much!

Share this post


Link to post
Share on other sites

OK I got my own answers.  Stock pipe is close to Factory Fatty, same P3 guard fits both.  Gnarly is a little different.  Factory Fatty more of a mid top pipe, which sounds good to me on a 300.  Stock pipe is, ready, $480!! :jawdrop:  :thumbsdn:

Share this post


Link to post
Share on other sites

WHAT?

FMF makes the pipe for Beta....its $480?

 

GP where did you see that price - from your dealer for the OEM one vs FMF?

Only thing on the beta site is attached.

 

HR

 

 

OK I got my own answers.  Stock pipe is close to Factory Fatty, same P3 guard fits both.  Gnarly is a little different.  Factory Fatty more of a mid top pipe, which sounds good to me on a 300.  Stock pipe is, ready, $480!! :jawdrop:  :thumbsdn:

 

Screen Shot 2013-12-05 at 10.09.03 AM.png

Share this post


Link to post
Share on other sites

Thats the price(from a dealer) of the OEM Beta pipe, which is made by FMF for Beta.  It is not a Gnarly or Fatty, and you cannot buy it direct from FMF.  Thats why its almost twice the $$, has to go through the system. The FMF pipes on the Beta site are the aftermarket FMF Gnarly and Fatty pipes, and are priced as you would expect.  No real surprise, all OEM pipes are expensive, GG pipes were over $400 as well.

Share this post


Link to post
Share on other sites

Glad I got my stock one fixed for a spare. Over 400 bucks for a pipe is crazy. Im be happy with my gnarly.

Share this post


Link to post
Share on other sites

Well I'm going to buy the Force guard.  If the carbon guards fit both OEM and Fatty I'm sure I can make it work being its not a contact guard anyway.  I'm sure it will pay for itself.

Share this post


Link to post
Share on other sites

We beat a Pipe guard in the shop today with a piece of 5ft conduit didn't really do much to the pipe guard but bent the conduit. Waiting on the video to upload. on Youtube

Share this post


Link to post
Share on other sites

LOL

impressive....to say the least..

here is the vid..

I asked a question on your other pipe guard compare vid as well.

 

http://youtu.be/5it_U0VxVQs

 

HR

We beat a Pipe guard in the shop today with a piece of 5ft conduit didn't really do much to the pipe guard but bent the conduit. Waiting on the video to upload. on Youtube

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By wachterxc
      Down here in mexico, land of the miracle and home of the weird, ive seen people use the same mousse for over 2 years. They claim that though it has become softer, it remains in place and performs well. How long have you used the same mousse for? 
      Rubber side down my guys,
      Saludos,
    • By AtlasEnduro
      I am pretty sure my buddy posts here, FX! I have lurked for a couple years. You all have answered so many questions via search, since I started riding. So thank you!
      I really hope you enjoy this video. I plan to be active here, making an account was the hardest part... 😛
    • By JWellz
      Anyone have any unbiased opinion if they were buying a new dual sport.   Would you go with the new Honda CRF450L or the Beta 430rrs?   Why
    • By hawaiidirtrider
      I just noticed that Matteo Cavallo’s bike has a kicker and estart like how Holcombe runs..
      I guess lightest bikes aren’t everything. 
       
       
    • By MotoXRacer_19
      As the title suggests, I've been debating the idea of throwing in a high compression piston. It will bump the compression in my 2014 KTM 350 XC-F from 13.5:1 to 14:1. First and foremost my main question is, because I live under 1000 ft and usually run 97 octane REC gas, will I have to change the fuel I run or not? Also, will I have to change out the cams to aftermarket and re-time the whole motor and ignition? I guess I really don't know what to expect so any advice will definitely help! Attached below is a photo of the bike I plan on putting it in.  

×