I miss David Bailey.

It was bad enough when Art Eckman left ESPN. No one else seems to bring the same level of enthusiasm to the sport. And with David Bailey's insight, the two were unbeatable as a broadcasting team. Now they're both gone and I'm gonna miss them big time. :)

Jamie Little sure is hot :D

Why did Baily leave? He is the Man! :)

Jamie Little sure is hot :)

Ich, I cannot stand that woman. Somebody tell her she doesn't have to shout into the damn microphone.

Jamie Little is hot! She looks good in person too. I saw her in the pits in Houston last year.

Jamie Little can shout into the mic all she wants cause she's smokin hot.

I'm not sure why Bailey quit. Maybe he's just had enough and wants to move on.

If anyone knows the real story I'd like to hear it.

Sure the chick is a hottie, but so what!

I want to watch motorcycle racing and listen to valid commentary with professional insight and experiance.

Chicks hotter than her are swinging bare tits on the very next channel, i'll go there for my hottie fix.

Give me Baily for my MX fix!! (keep shirt on, david)

> I'm not sure why Bailey quit.

He didn't quit. His contract wasn't picked up by ESPN. IOW, he was "laid off" He talks briefly about it in his Icon column in RacerX


Yeah, there are hot chicks on the boobie channel, but hot chicks that dig bikes are even better. I am married to one....woooohoooooo!!!!

Well said Wyatt.

Back to David Bailey, maybe we should start sending our letters in to ESPN.

Whats funny about it is that Jamie Little is faster than most of you'll.That girl can ride. :)

Wish "The Champ" was on ESPN also. As far as Jamie she is a very nice person as well as being attractive and a good rider. Cameron Steele is a moron.......someone tell him it's MOTO cross not MOTOR cross... JEZZZZZZZZZZ

Jamie Little sure is hot :)

Ich, I cannot stand that woman. Somebody tell her she doesn't have to shout into the damn microphone.

Your crazy!!!! She is hot!!!! She is really nice in person too. I saw her at the Vegas open a couple years ago. She is a very nice person. She's great around the little KTM kids. But you guys are forgetting about Heather Voss. Although I wouldnt mess with her because of her crazy redneck brother Heath.

I agree, Cameron Steele is a moron, and I don't think much of Todd Harris either.

Oh yeah, Heather Voss is hot too. Don't worry I havn't forgotten. We just dont get to see her intervewing riders on TV. Maybe she could take Bailey's place in the booth. She'd be a lot better than Todd Harris.

Todd is the announcer. That is his job. He doesn't know as much about the sport as the others, but someone has to be a proffesional anouncer. You know......tell the other guys when to shut up for commercials ect.

Cameron kills me with his nicknames for all of the riders and his jargon. The Average Joe tunning in for the first time has no idea who or what he is talking about.

Wyatt, I know you're right. Thats why I like Art Eckman so much. When it comes to broadcasting, he is a real pro. And he is a true enthusiast as well. He often brought a level of excitement to supercross that no one else could. I thought he and Bailey were the perfect team. Sometimes we take the announcers for granted. Ever watch any of the european motocross races? Holy Toledo, those guys in the booth will put you to sleep. :) Worse than golf.

Anybody else think Cameron used the phrase "threw down" enough?

Hopefully, ESPN will bring the Little Professor back.

On a side note, I just read where Evans said "I can run with Chad Reed" Methinks someone needs a urine test.


I agree with all. Cameron is a moron. He rides Elsinore quite a bit, and for where he is in the sport, you'd think he could bring it a lot better. As for the new woman, she needs a lot of practice. Heather better start paying attention to her looks also. Saw her at A1, and is "maturing" and not in a good way.

european motocross races? Holy Toledo, those guys in the booth will put you to sleep. :) Worse than golf.

I always thought, why don't they have the european GP races on TV, now I know. I never thought MX could be boring. Just shows how different the American attitude is. We want sports to be exciting.

Merfman ..that was to funny,yea run with reed..HaHa lol.

All of a sudden... :D:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Zack Ailing
      hey guys just picked up a new project bike. Its a 2008 Yz450f with a big bore kit and a stroker crank. The total cc of the engine is now 499. It runs on race gas and will be an absolute monster when shes ready to rip. I will continue to make more videos on the bike so stay tuned Link to the video: 
    • By High On Octane
      2005 YZ450F, Athena Big Bore, Power Bomb, Q4.
      Ok.  Last fall after a decently hot day at the track, I noticed coolant leaking from the weep hole on my water pump after pulling into the pits.  Ordered an Athena re-seal kit, put it all back together and didn't really get a chance to ride it.  3 weeks ago, went out to the track, and after about 20 laps, it started leaking again.  Kept filling it with water to get thru the day, never ran anywhere close to dry or empty, jut a cup or 2 low.  Ordered a Hot Rods re-seal kit with bearing and also ordered a new w/p shaft.  Did it all again and got it back together, ran it, and as soon as it got to temp, it was leaking out of the weep hole again.
      So, what the heck am I missing?  I'm totally stumped on this one.  Is something wrong with my case cover?  Do I need to replace the w/p itself?  I'm feeling like I should've just ponied up for the Boysen in the first place, and now it's biting me in the butt.  Any help or suggestions is greatly appreciated.  Thanks!
    • By Awheeler25u
      Alright guys, my 04 YZ450f runs fine minus some slight backfires when decelerating (need to adjust fuel screw). The other day when I was done checking my valve clearances I changed the oil and filter and put the bike back on the stand, kicked it a few times without the ignition coil in to get some oil flowing got off and noticed a little drip spot on the ground, it was no bigger than a dime so I thought nothing of it. Started the bike with no issues took it for a quick 10-15 min ride, came back to the garage to find out my whole case was soaked with oil and it started pooling in the low spots on the clutch basket side. I cleaned all the oil off and took it out again for 5 mins to try and see where it was coming from, here are my three possible places but nothing directly leads me to believe it’s any of the three either.
      1. Decompression plug area
      2.  Valve cover gasket leak (not really sure because the amount of oil leaking Looks to be a large amount
      3. Oil tank (bad weld or cracked weld somewhere
      what are you guys thinking?
    • By bofar
      Hey guys. I could really use your help diagnosing an issue that came up riding today. Bike is a 2013 YZ450F. Well maintained and haven't had any issues until now. Both the oil and coolant are new and levels are to spec. 
      After riding for about an hour in the sand dunes, I noticed a grinding going on on the right side of the bottom end (from what I could tell). When I looked to see what was going on my kickstarter was vibrating and grinding really loud. This was a different sound than if you engaged the kickstarter while running. It sounded less "clanky" and more "vibrating/grinding" if that makes sense. Grabbing the kickstarter and moving it didn't help the issue.
      When I noticed it, I shut the bike off and gave it a second. Being a few miles deep into the dunes, I had to get it out of there so I started it back up and it seemed fine- no grinding. I headed back to the car and after a few minutes, it came back so I shut it off again, started it back up and nothing. That process happened one or two more times before I made it back to the truck. Seemed to run fine otherwise. 
      Once I got it back to the truck I started it up and tried to pay more attention to what was going on but it wasn't doing it. I did seem to have more of a metal on metal noise coming from the motor. I started and stopped the bike a few times and after the motor stopped there was a distinct metal clank/grinding noise that happened right after the motor shut of for maybe half a second. This doesn't happen every time. 
      I tried doing some research and have seen things that make me think it could be the spring that connects to the kickstarter, or the kickstarter stopper plate- but really I have no idea.
      Seems strange that the issue is off and on.
      Thanks for the help!
    • By Goof331
      Does anyone know if there is any differences between the 2 radiators? Will the yz450fx radiator bolt on a yz450f? What I am wanting to do is wire up a fan to my 2016 yz450f. I know how I am going to do it I just don’t want to use a “universal” fan kit. What I would like to do is get a 450fx radiator and the direct bolt on Trail Tech fan for that radiator to have a good clean look.