Jump to content
Sign in to follow this  

Stroker XL 600

Recommended Posts

I've been doing a little research about the differences between the XR 600 and the XL 600. I was looking into the bore/stroke of each and found the XR is a 97X80mm and the XL is a 100X75mm. If I use an XR bottom end with an XL cylinder would the result be essentially the same thing as a stroker crank on an XL?

Share this post


Link to post
Share on other sites

Yup.  You'll need an XR6 piston to match.

You mean an aftermarket 100mm replacement piston for an XR600. OEM XR pistons max out at 98mm. The XL piston will not work.

Share this post


Link to post
Share on other sites

why an xr piston?

im guessing a different dimension between the pin center and the piston deck?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×