Rear shock spring quick question!

Quick question guys, I just bought a new Factory Connection rear spring and I don't know which way goes up. There's letters on the spring saying "Factory Connection" so I figured I'd put the spring on with the lettering upright, but If I put the spring with the smaller side up then the lettering is upside down so what do I do?

Sent from my iPhone using Thumper Talk

One more thing, I had my suspension rebuilt by factory connection awhile back and the spring I took of had the smaller side down

Sent from my iPhone using Thumper Talk

Well in my opinion, stock springs have a side to them. They come from the factory with the smaller side facing down. You will notice there is often a sharp pointy edge on the i.d where where the spring ends. That makes this end a bit smaller because it will hook on the spanner ring if you put it upside down. I don't know if it makes any sense...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now