Jump to content
Sign in to follow this  

Need help on a 2005 KX250 rear shock

Recommended Posts

Sorry if this has already been covered. I was wondering if someone could point me in the right direction. I was rebuilding my rear shock. I was at the point of installing my valve stack with all the shims. I had the valve stack on a screw driver in the order I took them off when the screw driver slipped off and my shims went every where. Now I do not know the order they go back in. It was the OEM setup. I know the large steel washer goes on first but other than that I'm lost. Any help would be appreciated. Thanks


It's a stock KYB shock

Share this post


Link to post
Share on other sites

It's a stock KYB shock

that doesn't help

you have to provide manufacturer model and built

Share this post


Link to post
Share on other sites

Measure every shim give us a list ...never mind I will pm ya.

I did this on my first shock ...a 1995 Ohlins on a KTM.

It will be much easer if you just call me....be glad to help.

Edited by E-TECH

Share this post


Link to post
Share on other sites

Sticker says Kawasaki and KYB. I don't see any other markings except a C487.

i was talking about the bike,

but - my bad - you already mentioned it at the topic.

 

here's the data:

Compression

12 - 40.2

28.25

38.25

36.25

34.25

32.25

30.25

28.25

26.25

24.25

22.25

19.3

 

Rebound

3 - 36.2

28.1

36.3

34.3

32.3

30.3

28.25

26.25

24.25

22.25

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×