Brake lever/motion pro throttle please help!

[hreihart]

My stock brake lever won't work with my motion pro throttle. The throttle body is bigger than stock so the brake lever adjuster bolt hits it and won't squeeze in very good. Do y'all have any suggested brake levers for this? Thanks

[avoidthedog]

if im understanding you right, cant you just slide the brake master cyl over to the left on the bars?

[hreihart]

The bars drop down to quick so therefor the lever points up and u barely have anything to grab

[avoidthedog]

post up a couple pics

[hreihart]

[hreihart]

Can anybody help?

[Caplar997]

Are your bars cut really short? My bars have tons of space for the lever to move around on, might be the bar bend as well...

[hreihart]

Ya it's windham pro taper bars I guess I'll have to switch

[tvalliere220]

just slide it right up against the housing so it goes around the throttle assembly if you can?

[hreihart]

I've tried that.The bolt still hits it thanks for the thought though

[bucket list]

I just had the same problem with my sons CRF450 when we put on the motion -pro throttle. What i did was make a spacer to move the whole M/C clamp assembly away from the handle bar about 2 to 3mm.  I know your going to ask for pictures but i'm sorry, i don't have the tech. for that, don't even own a cell phone! It is quite easy though, let me explain. First find a piece of 1.5 to 2" plastic plumming pipe, ABS or PVC. Cut a piece off just slightly wider than the clamp (perch) cut that piece so the profile of it looks like a 1/4 moon. You'll have to use a file to shape the ends to get that 1/4 moon shape. That piece will fit inside the clamp, between the bar and the M/C and your lever will no longer hit the throttle.