Jump to content
Sign in to follow this  

Wheel bearings DNA

Recommended Posts

Ok so I thought the bearings were going bad on my rear aftermarket dna wheel but the bearings arent bad the axle is slightly smaller in diameter. (Which is bullshit)

I bought the 2009 crf450 pivot works rear wheel bearings and seals from rockymountain

Will the pivot works bearings made for a stock 2009 crf450 wheel of the correct inner race diameter fit in my dna wheels?

Just wondering, so I dont get my old bearings out and have the new ones not fit and &%$#@! myself

Share this post


Link to post
Share on other sites

you'll have to contact DNA to find out what bearings you'd order or if the OEM bearings swap. But the worst case scenario is to simply pull the bearings in the wheel now match them up. Sealed bearings are usually industry standard stuff. Its not like the Honda OEM crank bearings that are intentionally odd sized.

 

I recently modified a Blackbird swing arm for my 83' CB1100F and found that the ARM bearings are just standard bearings. Honda OEM bearings were 16 bucks a piece, I found 10 bearings for 10 bucks on ebay.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×