Jump to content
Sign in to follow this  

Rekluse question

Recommended Posts

Installed the exp on my 04 rm 250. My idle was set right before. When I put it in gear it idles real low. Makes me think it's gonna die. I turned the idle half a round out and it creeped and stalled is it normal to idle low once in gear?

Share this post


Link to post
Share on other sites

Free play is set and I broke it in correctly just doesn't idle has high as before and when in neutral

Share this post


Link to post
Share on other sites

When the engine is in neutral, the Rekluse should have little or no effect on the idle speed regardless of how it was set up.

Share this post


Link to post
Share on other sites

It's all normal until I put it in gear. It just idles lower than normal then. It doesn't die. Just didn't know if the lower idle is normal

Share this post


Link to post
Share on other sites

With the bike in gear, turn the idle up until the clutch is just starting to engage. If the idle is still to low, you need to make an adjustment to the EXP. Check the Rekluse website for instructions.

Share this post


Link to post
Share on other sites

Idle needs to be up some when you install a recluse as there is SOME clutch drag slowing it down. Just turn the idle up enough to compensate.

 

Joe

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×