Jump to content
Sign in to follow this  

Wiseco leaking head gasket

Recommended Posts

Hello,

I just replaced the top end on my 1087 cr125 with a Wiseco top end kit, i had it bored to 56mm because of cylinder damage, i had the squish checked by the machinist and he adjusted it. The bike runs great but the head gasket leaked throught the bolts...It was all torqued to factory specs and i have no idea why it leaked. I ordered a new head gasket (copper) but i dont want it to leak like the first one did. It was installed properly and i was wondering if you have any advice?

Thanks,

Isaac

Share this post


Link to post
Share on other sites

I just replaced the top end and bored out my 1987 cr125 and it runs great and everything works but the copper head gasket (wiseco) leaks through the bolts. I ordered a new gasket set and don't want the new one to leak. It was installed right and all the bolts were torqued to proper specs.

Thanks,

Isaac

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×