Jump to content
Sign in to follow this  

2003 Cr125 won't idle

Recommended Posts

So my cr125 started leaking gas out of the bowl drain hose when ever it was tilted alittle, I ignored the problem for weeks and so today I decided to take the carb apart and clean it, before I took everything apart it idles strong and never died, I took it apart and clean everything out and put it back together, only a little gas leaks out now but it won't idle at all!! I don't know what happen, I just cleaned it and put it back together. It revs strong but just does want to idle. And if it does idle it's a real low idle but bogs and dies after 5 seconds, any help would be great, thanks!

Share this post


Link to post
Share on other sites

You probably just need to readjust the A/F mixture screw and then reset your idle screw....but if it is still leaking a drop of fuel then you need to first set that float height to spec and check the float needle and seat are in good order.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×