Jump to content
Sign in to follow this  

PWonly 1/4 turn throttle

Recommended Posts

anyone installed one of these? I bought it back in the fall, but the stock throttle cable didn't seem to work with it.

Talked to pwonly on the phone and they said it should be fine and they have no special cable for this application.

 

It looks to me like I'd have to remove the curved metal sleeve from the end of the cable, but I would assume that the cable has crimped on ends that would prevent the cable being removed from the sleeve?

Edited by gladly

Share this post


Link to post
Share on other sites

YES I ordered one of these for my sons PW80 about six months ago.

And to my surprise it didn't bolt straight on.

I spent about three hours cutting the cable, soldering, hand filing various parts to make it work etc....

I also ended up removing  the curved metal sleeve.

It is also difficult to re-assemble each time as the cable jumps out of the throttle housing.

But once it is in,  it is fine.

 

Been six months now and still going strong......

 

Good luck...

Share this post


Link to post
Share on other sites

Did this kit eliminate the oil injection or is there a way to reconnect?

Share this post


Link to post
Share on other sites

Did this kit eliminate the oil injection or is there a way to reconnect?

shouldn't affect the oil injection at all if it's using the stock cable

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×