Jump to content
Sign in to follow this  

Eibach Springs

Recommended Posts

I've been severely disappointed with my 98 XR4 front suspension at the track so I decided to perform the shim stack mod.  After pulling the compression bolt, I count only 7 shims (stock shim count for 96 & 97) rather than the stock 12 shim count that a 98 is supposed to have.  So this tells me that someone has replaced the front forks.  Ok, so I pull the spring and see that it has an aftermarket Eibach spring that is stamped with 21/93  996.024.0.  I cannot find this spring anywhere on the internet but it really sounds like a 24 KG/MM spring rate.  I really hope not because I am 180 lbs and that is a much lower spring rate than stock on a bike that is already undersprung. 

 

So can anyone tell me what the specs of his spring is and what the 21/93 means?

 

 

 

Share this post


Link to post
Share on other sites

I think just below that number on the spring are the numbers you need. I will take a look at a set later and update if not correct info.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×