Jump to content
Sign in to follow this  

6.0Kg rear spring installed need sag specs

Recommended Posts

I weight 250 installed my new spring i measured with the bike on a stand with no weight at 571.5mm i took it off the stand and with me on board i measured 482.6mm which equals about 88mm is that at an acceptable range?

Edited by fuentes52

Share this post


Link to post
Share on other sites

I weight 250 installed my new spring i measured with the bike on a stand with no weight at 571.5mm i took it off the stand and with me on board i measured 482.6mm which equals about 88mm is that at an acceptable range?

Were you wearing all your riding gear, did a friend help you?

90mm-100mm is where you should be.

With the correct spring, you should also have 10mm-25mm of unladen sag, that's the bike under it's own weight.

  • Like 1

Share this post


Link to post
Share on other sites

Were you wearing all your riding gear, did a friend help you?

90mm-100mm is where you should be.

With the correct spring, you should also have 10mm-25mm of unladen sag, that's the bike under it's own weight.

yes i was wearing all my gear. Ill have to back the collers out and remeasure thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×