Jump to content
Sign in to follow this  

2001 Drz400e crazy idle

Recommended Posts

Well I took my carb out the other day (it's the slant body fcr) and I turned the fuel screw all the way in and it seemed to take awhile(for some reason I didn't count the turns). So I just turned it out like 2.5 turns and since then it will start sporadically revving, sometimes up to redline. Even as soon as I start it some times! is this a fuel screw problem? I also ground down the nub on the AP diaphragm and wired the arms together what could this be?

Share this post


Link to post
Share on other sites

The Eddie Mod shouldn't have any effect on the idle circuit....

You may have an air leak... check the carb is seated in the intake boot correctly....

Run thru the procedure in the FAQ's to set your fuel screw

  • Like 2

Share this post


Link to post
Share on other sites

Thanks a lot guys!! just installed a new throttle cabe to it's not that I'll check for at leaks and set the fuel screw today and hopefully that does the job!

Share this post


Link to post
Share on other sites

Leaking air boot was the problem runs like a Champ now thanks a lot!!

 

If whenever you have an issue with your bike directly after a reassemble etc,  more than likely it's related to this.....

 

.Usually just a matter of going over you work with scrutiny.... :smashpc:

 

Glad it was an easy find.... :thumbsup:

  • Like 1

Share this post


Link to post
Share on other sites

Well :lol:

It's the Man of the Board who does it again , we all know who it is .

He is From QLD ..Here (Down Under)

 

 

Ha Ha....Thanks for the plug...But really,..... this stuff ain't rocket science....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×