Jump to content
Sign in to follow this  

exhaust bridge cracked AGAIN!

Recommended Posts

Well when I picked up this 03cr250 it had fairly low hours, but I decided to do a top end to be safe. Pulled my cylinder off and found that it was cracked. So I sent it out and had US Chrome send me a new one. Rode it for a year( and not very often due to injury) decided to do another to end. Found the cylinder had cracked again. So I sent it back to US Chrome and had this cylinder repaired. In the meantime did the research on this issue.... so I used an oem piston and even drilled relief holes in the piston at the bridge. Also made sure US Chrome relieved the exhaust bridge... ran that for about forty hours and wallah another cracked exhause bride..

Not sure whats going on here. Am I missing something. I ride it hard! But not nearly as hard as a pro! I would think the bike would be a little more durable and be able to last longer than that.

Any input would be appreciAted

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×