Jump to content
Sign in to follow this  

1992 DR 350 is lowered. How to get it to stock height?

Recommended Posts

My DR 350 looks like it is a few inches lower in the back than its supposed to be. I dont know what to replace. Do i need a bigger shock spring? Or new shock linkages? Hopefully someone out their will know more than i do about this. There are pictures below showing the suspension components on my bike and a compatison between my bike height, and a stock bike height. Thanks guys

ImageUploadedByThumper Talk1399249183.288729.jpgImageUploadedByThumper Talk1399249220.629412.jpgImageUploadedByThumper Talk1399249364.576669.jpgImageUploadedByThumper Talk1399249777.666532.jpg

Share this post


Link to post
Share on other sites

measure the rear linkages to make sure there the orignal length.  Some companies make a longer rear linkage which allows the bike to sit about two inches lower.  The linkage that does this is only a few mm longer than original.  If they are the original linkages, I would check your shock to make sure its not too worn out.

 

Good Luck

Edited by enduro350rider

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×