Jump to content
Sign in to follow this  

84/97 cr250 engine swap

Recommended Posts

Hey guys I have gathered up a collection of older cr 250s. recently I picked up a mint 97 cr with a pretty trashed motor(bad transmission, burned up piston, and a hole inn the case and flywheel cover) that being said I ripped the motor out of it and set it aside for parts(contact me if you are interested in the parts and pieces.) The frame, suspension, plastics, and brakes are all in pretty mint condition.

 on the other hand I have a 1984 cr 250 with the atac motor, there is really nothing wrong with it other than a bad coil, however I would like to swap the motor into the 97 with upside down forks and nice rear suspension. I was wondering if anyone had made this swap and had any advice.

 I have measured the motor mounts and I think I can make it work with some spacers or a re-fabricated swingarm/motormount.

  I am really just getting started on this project any advice would be greatly appreciated.




Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this