Jump to content
Sign in to follow this  

1996 rm250 sputtering on top

Recommended Posts

Got a 1996 rm250, new top end, before v-force reeds, and cleaned the carb, it starts 1st kick but the problem is when I get on the gas, it starts to sputter and spit really bad on the top end. Thought it was the reeds so I replaced those, cleaned out the carb and put a new top end on it but still no luck... Any ideas what it could be??

Share this post


Link to post
Share on other sites

Whats the jetting and wiring like?

Share this post


Link to post
Share on other sites

Not too sure haven't looked at the jet sizes, but wiring is good along with the stator. Put a new spark plug in it and it seemed to clear up a good bit but still could be netter

Share this post


Link to post
Share on other sites

+1 on the jetting.  Sounds like either the main is way too big or the needle clip is too low.

Share this post


Link to post
Share on other sites

I'll give the needle a look over along with the rest of the jets, thanks guys!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×