Help, broke connector on my TPS wire

[dirtbikesonny]

While taking my carb off one of the red wires on the TPS pulled out of the plastic connector. I pulled the crimped piece out of the plastic connector but was not able to salvage it to recrimp the wire into it. This is a 2005 YZ. I have a ride planned for Saturday and a buddy who is driving 100 plus miles down to ride with me. What are my options for repair? I am guessing my dealer wont have anything like that in stock. Where else might I find a connector similar to what  I have?

[cookiemonsterMoA]

depending on how bad the pin is (since no pictures) you might be able to solder the wire to the pin and then put it back into the connector. If that can be done don't glob the solder on you want it thin so you can get the pin back into the plug.

[kmtr]

Where else might I find a connector similar to what  I have?

 

It is 3pin Sumitomo MT.090 waterproof connector.

 

How about this? 

http://www.cycleterminal.com/090-connectors.html

[cookiemonsterMoA]

It is 3pin Sumitomo MT.090 waterproof connector.

 

How about this? 

http://www.cycleterminal.com/090-connectors.html

Great find ?