Jump to content
Sign in to follow this  

50 cc wont start

Recommended Posts

Having good luck on this site. I got this Chinese bike called moto x that my brought home. It doesn't start and I don't know anything about it. I've done the basics new plug oil change. It has spark and compression. Cleaned the carb and adjusted the valves as best I could. Don't have any feeler gauges so I used a pop can it believe its .35 is that in spec for a 50 cc engine? I was told they go any where .20 to .50 am I on track here? Any other ideas. Didn't know if I should be looking at trimming or anything.

Share this post


Link to post
Share on other sites

That's about right .003 to .005 as far as valves go. Usually the electrical on these bikes go first so check that too!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×