Jump to content
Sign in to follow this  

Clutch problems

Recommended Posts

Got a 2011 250xcf and can't ever start bike in gear with the clutch in or if I start the bike and don't let it warm up and shift it into gear (with the clutch in obviously) the bike will stall. If I don't let it warm up and I'm on the road where there is lots of traction I have to Rev it a bit and then shift it into hear so bike will not stall. Do not have the stalling problem when bike is warm. But I can never start the bike if it's in gear but clutch is held in. What's my problem?

But I can start bike if clutch is pulled in and in gear if the bike is still moving

Share this post


Link to post
Share on other sites

Your clutch is not clearing (fully disengaging )

Share this post


Link to post
Share on other sites

could be worn springs/plates/warped plates, clutch not bleed well, worn grooves in basket or hub, i would start by bleeding the clutch with fresh fluid and a inspect the plates/springs.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×