Jump to content
Sign in to follow this  

300 clutch problem

Recommended Posts

2014 300, when the clutch lever is pulled in all the way and shifted into gear the bike pulls forward a bit and the bike almost dies. Does anyone else have a similar problem and what can i do to fix it?

Share this post


Link to post
Share on other sites

Does it do it all the time or just cold? My 14 will only do that if I haven't warmed it up at all. A lighter weight if oil could help too if you are running something real thick.

Share this post


Link to post
Share on other sites

Mine does it too, just got the bike though 2006 and it has a brand new clutch basket and clutch plates so thinking it may just need to get run in - it also is fine when warmed up, just when it is cold or the first time or 2 I put it in gear is it like this.  I have also read that the aluminum clutch plates can warp a bit if they get hot and that will make the clutch not fully disengage.


 


Curious if anyone knows what it is also!


Share this post


Link to post
Share on other sites

It does it all the time when it is hot or cold. I just bled the fluid and their was no air in the line.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×