Jump to content
Sign in to follow this  

Jetting suggestions/what works for you?

Recommended Posts

Stock bike with stock pipe etc at sea level running lower temperatures (15C 60F)

Plug reading is overall black and fair bit of carbon, current jetting is stock.

Rider is after a more responsive bottom to mid range if possible, to use his words-'I want it to be crisper as it feels like it has some bog off the bottom'

This bike is used on tighter MX where majority of riding is within the 1/4 to 3/4 throttle in most gears with some straights that require 1/1 throttle.

I'm considering just going one down on the pilot but unsure on the needle/clip position....

Open to suggestion and feed back is greatly appreciated!!

**this is not a thread about carb/engine problems-merely some jetting suggestions**

Share this post


Link to post
Share on other sites

Go down one clip and see what happens. You're gonna have to play with it and see what works. What's in it now?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×