Jump to content
Sign in to follow this  

XL250r stator test results .... any advice welcomed

Recommended Posts

Hi All

Re missfire ..... checked stator via tips on utube. checked ohms between all 3 wires ... yellow and red 1.2. yellow and white 0. white and red 0. Then tested 3 wires for grounding ... yellow fine, red fine, white grounding with .8 to 1.2 ohms. Going by info grounding wire is not a good stator and also my first test with ohms between and crossing over wires at plug , they all meant to be around 0.5ohms.

So all in all seems to be stator issues.

 

There is a 4th wire being green and red but this seems to be the neutral light by my wiring diagram and has been disconnected down by the housing 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×